LAC7700R_ENG ENGLISH CAR CD/MP3/WMA Receiver OWNER’S MANUAL MODEL : LAC7700R Please read this instruction booklet carefully and completely before installing, operating or adjusting this product.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc. on the surface. Do not expose the disc to direct sunlight or excessive heat. This unit cannot play 8cm disc (use 12cm disc only). 8 cm • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
MP3/WMA Disc compatibility with this unit is limited as follows: 1. 2. 3. 4. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA) Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) CD-R/CD-RW file system should be “ISO 9660” If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example “Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
Before use Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. 1. 2. 3. 4. Press the “ ” button to unlock the control panel. Push the control panel to right. Pull the control panel out of the unit. Put the detached control panel into the protective case.
Control panel 1 2 17 1 2 3 4 16 MP3 13 12 5 • Traffic Announcement [TA] • Programme Type [PTY] 6 • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS] • Bass Reverb Blaster [BRB] 7 Display [DISP] 8 Release/Eject 9 AUX In [AUX] 10 Preset Station [1~6] 11 Shuffle [SHF] WMA u • Folder Up/Down U/u 3 4 14 15 [SOURCE] i • Skip / Search I/i • Seek/ Tune • Auto Store [AS] • Preset Scan [PS] u • MP3 Track +10/-10 U/u MP3 5 WMA Remote Sensor • Volume • [MUTE] • Power [PWR] 11 6 7 10 8 9 12 1
Battery Installation 1 2 3 Remove the battery holder with a sharp product like a ball point pen. Install the battery on the battery holder. Install the battery holder back into its original position. Note • Use only one CR2025 (3V) lithium battery. • Remove the battery if the remote control is not used for a long period of time. • Do not leave the product in a hot or humid place. • Do not handle the battery with metallic tools. • Do not store the battery with metallic materials.
Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
A From antenna B To the wiring of the vehicle colors of leads. • BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection.
Basic operation Turning the unit on Press MUTE/PWR (POWER/ on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (POWER/ on the remote control). Insert a disc 1 2 Press to open the control panel. Draws the disc, and starts playback automatically. Eject a disc Press to open the control panel. The disc automatically ejects from the loading slot.
Changing the general settings 1 2 3 4 Press and hold MENU/SEL (MENU/SEL on remote control) so that one of menu items appears. Press MENU/SEL (MENU/SEL on remote control) to scroll between menus. AF ON t REG ON t TA ALARM t PI SOUND t AUX ON t AUX 00dB t DEMO ON t BEEP 2ND Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified belows. (Press VOLUME on the remote control.) Press and hold MENU/SEL (MENU/SEL on remote control) to finish the setting.
AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON When using a auxiliary equipment. AUX OFF When not using a auxiliary equipment. AUX (Auxiliary) 00dB / +6dB You can adjust the volume level of each source to prevent radical changes in volume when switching between sources.
Adjusting the sound level 1 2 Press MENU/SEL (MENU/SEL on the remote control) repeatedly to select the mode you want to adjust from volume, bass, middle, treble, balance and fader. The indicator lights up in the following order. VOL t BAS t MID t TRB t BAL t FAD Rotate the MUTE/PWR. (Press VOLUME on the remote control) to adjust the sound quality. Indication Turn right Turn left VOL BAS Increase the volume level. Decrease the volume level. Increase the bass level. Decrease the bass level.
Bluetooth operation Using a Bluetooth wireless connection Your unit supports Bluetooth wireless connections. You can set up a wireless link with Bluetooth phone. Starting Bluetooth on your phone Your phone’s Bluetooth feature may be set to off by default. To use your car Bluetooth feature, Bluetooth must be turned on in your phone. Note Refer to your phone’s user guide. Pairing your unit and Bluetooth phone Pairing links your unit and Bluetooth phone, and is required only once for the initial setup.
Auto Connection On / Off ON : Bluetooth phone with a previous record showing that it has successfully connected will automatically start the connection process when starting the car. OFF : Cancels the function. Auto Answer On / Off ON : If you set the automatic answering function on, hands-free answering call is possible. OFF : Cancels the function. HF VOL (Setting range : 0~35) After connected, it is necessary to adjust the volume of Bluetooth’s voice.
Missed call notification When an incoming call is not answered, the missed call message is displayed on the your screen. 1 2 3 4 The “ ” appears on the screen. Press B/T to place a call. Press B/T to place a call to entered phone number. To end the call and hang up the phone, press and hold B/T button. Auto transfer It is possible to select the automatic connection between your Bluetooth phone and this unit. 1 Press B/T to answer the call. 2 Press B/T again. The “Private” is displayed.
Storing a call number in last answered. If you press any of the preset button 1~6, you can easily store up to 6 phone numbers and laster recall with the press the button. 1 2 3 4 Press B/T to enter the menu. Press U/AS or u/PS up or down to select the call number. Press one of preset buttons 1~6 and hold until the beep sound. The “Save to..” appears on the screen. The selected phone number has been stored in memory. The next time, you press the same preset button, the phone number is recalled from memory.
HSP HSP is short for Head Set Profile. This profile is used for connecting a headset and for communicating terminal wireless technology. GAVDP This profile uses an Initiator (INT), a device (such as a portable player) that initiates a signalling procedure to send a request to an Acceptor (ACP), - such as headphones etc.
Note • Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. • When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Auto search memory This function lets you automatically store the 6 strongest broadcast frequencies. 1 2 Press U/AS until “AUTO STORE” appears.
No Music group No Speech group 1. 2. 3. 4. 5. 6. Pop M, Rock M Easy M, Light M. Classics, Other M Jazz, Country Nation M, Oldies Folk M 1. 2. 3. 4. 5. 6. News, Affairs, Info Sport, Educate, Drama Culture, Science, Varied Weather, Finance, Children Social, Religion, Phone In Travel, Leisure, Document Note RDS is only available for FM reception.
Intro scan The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder ( SCAN) on the disc are played. 1 2 Press SCAN. – SCAN MP3 WMA (or SCAN CD ) appears on the display window. Press and hold SCAN for about 2 seconds during playback. – SCAN appears on the display window. MP3 WMA Press SCAN again. – SCAN or SCAN disappear from the display window and the intro scan is cancelled.
To go to a particular quickly (+10/-10 buttons) MP3 WMA (If there is no folder or one folder.) U on remote control) to skip to the next 10 track, and press u/PS (u u on remote Press U/AS (U control) to skip to the previous 10 track. To skip to the next or previous folder MP3 WMA (If there are more than two folders.) U on remote control) to skip to the next folder, and press u/PS (u u on remote Press U/AS (U control) to skip to the previous folder.
Troubleshooting Sy Co : Symptom / : Correction Ca Ca The loaded disc is of a type this unit cannot play. Co Check what type the disc. : Cause Sy Power doesn’t turn on. / The unit doesn’t operate. Ca Leads and connectors are not properly connected. Co Confirm once more that all connections are correct. Ca The fuse is blown. Co Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate.
AUX SECTION Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 dB Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.05 % Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
