ENGLISH AV Multimedia System OWNER'S MANUAL MODEL : LAD-9600R Please read this instruction booklet before connecting, operating or carefully and completely adjusting this product.
Safety note CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT NO USER COVER(OR BACK) SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety The driver must not watch the monitor while watches the monitor while driving, driving. note If the driver it may lead to carelessness and accident. cause an This unit is for vehicles with a 12-volt battery and negative grounding. installing it in a recreational vehicle, lorry or bus, check the battery voltage. To avoid shorts in the electrical system, be sure to disconnect the E battery cable before beginning the installation.
Table of contents Safety 2-3 notes Table of contents 4-6 Before 7-8 Basic operation 9-19 operation Frontpanel......................................9 Monitor........................................10 Accessories.....................................10 Remotecontrol...................................11 Installthebatteryofremotecontrol....................12 Usingtheremotecontrol...........................12 Connectingthesystem..........................13-15 Detachingthecontrolpanel..................
Table of contents Bluetooth 28-35 operation .28 UsingaBluetoothwirelessconnection StartingBluetoothonyourphone.....................28 .28-30 PairingyourunitandBluetoothphone Headsetfunctionality..............................30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SETUP........................................31 CONNECTPHONE...............................31 INFORMATION(CONNECTPHONE)..................31 .32 BTInformation(Bluetoothinformation). . . . .
Table of contents DVD/VCD 43-46 operation PlayingaDVD/VCDdisc...........................43 Ifmenuscreenisdisplayed.........................43 Play/Stop/Pause...............................44 Skiptothenextchapter/track........................44 Skiptothepreviouschapter/track....................44 Return to the beginning of the current chapter/track .44 . . . . . . Search.........................................44 MENU/VCDMENU...............................44 SEARCH...................................
Before A section whose title has only to the disc one of the represented by the following symbols symbol. DVD VCD Video CDs CD Audio CDs MP3 MP3 files WMA WMA files DivX DivX files DVD About the is operarion applicable Symbol Display When you are operation, it may not be watching disc. When this a DVD and performed happens, attempt to due to the perform an programming the unit indicates the button on on the the screen.
Before operarion ? ? A defective or soiled disc inserted into the unit drop during playback. Handle the disc by holding its inner and outer can cause sound to edges. ? Do not touch the surface of the unlabeled side of the disc. ? Do not stick paper ? Do not expose the disc to direct ? This unit cannot ? Clean the disc before 8cm outward with ? Never use a or tape etc. 8cm disc play on solvents such Regional code designed as excessive heat. benzine only).
Basic Front operation panel 12 FLIP 3 456 TILT DISP OPEN EJECT VOL OPEN ARROW SRC RSE BAND 1. FLIP 12. BAND temporarily upright. panel horizontal when the LCD Selects the band. panel is 13. RDS ? TILT Selects the TA on/off for (Press Adjusts 3. EQ 810111213141516171819 9 Turns the LCD 2. PHONE TA/AF R 7 RDS the monitor angle. ? for (Press DISPLAY WINDOW DISP 5. OPEN/CLOSE Selects a different Selects the display. 6. DIMMER SENSOR 7. VOL. 17.
Basic operation Monitor BRIGHT WIDE 2 1 1. WIDE 2. Changes DVD VCD the screen mode. 3 BRIGHT -/+ Adjusts 3.
Basic operation Remote control 4. ARROW v/V/b/B ? 1 6 ? ? ? 2 ? (up/down/left/right) (up/down) Selects the menus (up/down/left/right) Skip (left/right) Search (left/right) Selects a preset station (up/down) Selects the folders ENTER Confirms 7 3 5. 4 selection. menu 0-9 number buttons ? Selects numbered items in the ? Selects a stored radio station menu. frequency (1-6). 8 REPEAT ? 5 9 ? Plays ? Plays CD tracks SCAN 10 ? ? 6. POWER 7. SOURCE Selects audio 2.
Basic Install the Pull the operation battery of remote control tray battery of remote control outward pencil or ball point pen and insert the battery with the plus (+) minus (-) poles pointing in the proper direction. with on the back of a 1 Remove the 2 Install the 3 Install the Using battery holder with a pencil or ball point pen. battery on the battery holder. battery holder back into its original position.
Basic the Connecting operation system * OPTICAL OUT (Option) Main unit Power Cable Main unit/Hide-away Connecting Cable (For unit main unit) Orange Microphone Plug DIMMER To lighting switch Filter Box terminal. Black GROUND To the car (-) body. Yellow TO BATTERY To the car (+) battery, Microphone Fuse 5A continous +12 V DC. With the sun visor up, install the microphone.
Basic operation Yellow Blue/White TO BATTERY REMOTE ON To the To the amplifier remote Black Red GROUND To the To the terminal from which the power is supplied when the To the power antenna Pink Orange REVERSE GEAR rear use the Note) the view camera, reverse lead. Use a (-) body. POWER ANTENNA switch is set connecting car Blue to ACC When (+) battery, continous +12 V DC. on. TO IGNITION ignition car H.
Basic operation REAR OUT VIDEO IN AUX IN AUDIO PRE-OUT CAM (Rear Camera) Auxiliary Devices External Power Amplifier Camcorder VCR Connecting If using an the Reverse Gear optional rear view camera, the reverse lead must be connected. 1. 2. Clamp the reversing lamp lead. Clamp firmly with needle-nosed pliers.
Basic operation the control Detaching You panel detach the control panel when leaving the car. detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. can When " " 1. Press the 2. Pull the control button to unlock the control 3. Put the detached control panel panel. out of the unit. panel into the provided case. Protective Case Attaching the control panel Insert the left side of control 1.
Basic operation Basic installation Before make installing, OFF and remove sure that the ignition-switch is set battery to avoid the terminal of the to car short-circuiting. 1. Remove the 2. 3. Make the necessary connections. Install the installation sleeve. 4. Install the unit into the installation sleeve. existing receiver unit. Bend the claws according to the thickness of the dashboard Removing If there is in the the already existing dashboard, it must be removed. 1.
Basic operation VOL ARRO Turning the unit Press any buttons. Turning on (Except the DISP or EJECT) the unit off Press and hold the "VOL" button. DISP OPEN Opening Press the The LCD / the LCD Closing "OPEN(CLOSE)" button. panel will be opened or closed. Note The LCD panel will be closed automatically with turning the power off. FLIP TILT Changing the monitor Press the "TILT" button to easily viewable angle adjust the LCD panel to an angle.
Basic Ejecting operation disc a EJECT Press the "EJECT" button. The disc is from the ejected slot. loading Note If the disc is not removed in ejected approximately 10 seconds, the disc is automatically inserted again into the slot. loading the volume Adjusting Rotate the "VOL" knob to VOL adjust ARRO the sound level. Note When you turn the unit off, the current volume level is automatically memorized.
Dual mode operation Using You can and a You can monitor connected to REAR OUT a play back two different secondary source. to the listen to the main secondary jacks. source through source main sources as a through the source speakers and the monitor connected to the REAR OUT Selecting a source Press the "RSE" button The mode switches as repeatedly to select a source. follows. RSEDVDtRSEUSBtRSEVIDEOtRSEAUX ? RSE DVD You ? You ? can select the built-in DVD drive.
Setup operation SETUP You customize the various can options according to your needs. particular Touch the "SETUP" button. The setup screen appears on the screen. SCREEN Language You can set the Touch the display language. language button you want. Setback You can move ? Yes ? No : the LCD panel a little forward or backward. Activates the functions. Cancels the functions. : Adjust Picture Brightness You can set the monitor Touch the b or brightness.
Setup operation BG Animation You can of sound select one of the 5 modes. It displays the change output during playback. Touch the image button you want. Rear Camera ? On : The rear view through the rear view camera is automatically displayed on the monitor when the rear gear is applied. ? Off : Cancels the function. Note Touch the previous button to exit the current screen.
Setup operation SOUND Balance/Fader Touch the "Left" 1. Adjust or "Right" button. balance---speaker output right speakers. the left and Touch the "Front" 2. or balance between the "Rear" button. Adjust fader---speaker output and rear speakers. balance between the front Woofer Output Level Touch the b or B button to select the output level. Cut-off Frequency Frequencies 80/120/160 Hz are sent to the subwoofer.
Setup operation Rear Speaker On : Activates the Off : Cancels the function. rear speaker output. Beep Beep Pattern Long Key : When you a beep sound occurs. ? ? All press the button for When any button is Volume : Beep Adjusts the Beep Volume. pressed, a beep a long time, sound occurs.
Setup operation Aspect Ratio Wide Select when your screen's aspect ratio is fixed at 16:9 (Wide screen). Letter Box Select when your screen's aspect ratio is fixed at 4:3 (Conventional screen). While viewing a wide screen picture, the the black bars appear on the top and the bottom of screen. Panscan Select when your screen's aspect ratio is fixed at 4:3. While viewing a wide screen picture, the black bars do not appear. The left and right shown on the screen.
Setup operation Changing 1. the password Touch the "Password" button. 2. Enter the 3. Confirm the 4. Touch the "Enter" button to reset the new password new newly assigned Changing 1. the Touch the v or with the numeric buttons 0-9. password with the numeric buttons 0-9. area to the code V button to select the Refer to the page 53 to find the 2. password one. area Touch the "END" button to exit the area code. code. setup menu.
Setup operation RDS TA Mode TA Seek When the newly information for 5 tuned station does not receive TP seconds, the receiver station which has the same PI as same retunes to the next TP information as well as the the last station. TA Alarm When newly a seconds, tuned station has double a beep TP information for 5 no sound is output. PI Mode PI Mute If the sound of intermittently, a station with different PI is heard the receiver mutes the sound right now.
Bluetooth operation Using a Your unit You Bluetooth wireless connection. supports Bluetooth wireless connection. set up can a wireless link with Bluetooth Starting on a Bluetooth your phone. phone. Your phone's Bluetooth feature may be set to off by default. To use your car Bluetooth feature, Bluetooth must be turned phone. your FLIP TILT DISP Notes ARROW SRC RSE BAND RDS PHONE in CLOSE EJECT VOL on Refer to the page 54 for details.
Bluetooth 6. In an initial CODE" connection, the screen as For successful user shown in the will connection, make PIN code for Bluetooth phone see sure Touch the 0~9buttons, then confirm. 8. Touch the "Enter" button to 9. If the connection is You complete successful, can the pairing the Bluetooth confirm it with the in the "CONNECT PHONE" CODE to enter the :1234) same and the unit. 7. registered. the "INPUT PIN figure. (PIN . is phone checking mark screen.
Bluetooth operation Connection Turn through a bluetooth phone Bluetooth on a phone. phone's user guide. Refer to your 1. Press the PHONE button to select the 2. Touch the button. The "SETUP" screen appears on the phone. screen. Touch the "Connect Phone" button. 3. The "CONNECT PHONE" The Bluetooth phones the "CONNECT PHONE" Perform 4. "Searching a appears on the screen. be found (searched) only on screen can screen. Bluetooth device" in the Bluetooth phone. Initiate the 5.
Bluetooth SETUP Connect Phone You can check the connected Bluetooth phone. (Bluetooth Information) the Bluetooth phone information. BT Information. You can check CONNECT PHONE Search You can search the connected Bluetooth phone. Edit You can display the "INFORMATION" screen. Pop-up screen appears on the screen. a pop-up screen containing three buttons such as Info., Delete, and Cancel. Press the Info. button among the "INFORMATION" Info. then, and you can enter into screen.
Bluetooth operation BT Informtion You (Bluetooth Information) check the Bluetooth can phone information. Rename Renames the Bluetooth phone name. End Exits the current screen. Show/Hide Selects whether bluetooth unit phones able to search the are not. or ? The entered ? Keypad ? Confirm the entered ? Changes ? Inserts a space at the cursor position Delete the previous character at the cursor ? ? name is displayed button the name language.
Bluetooth Delete All You can delete all lists. Edit You can display the "INFORMATION" screen. Pop-up screen appears on the screen. a pop-up screen containing tree buttons such as Info., Delete, and Cancel. Press the Info. button among the "INFORMATION" then, and you enter into can screen. Note If the hands-free or headset connection has already made, disconnect the corresponding connection contacts entry.
Bluetooth operation Making There call a various ways to make calls with this unit. To make a call by entering numbers on your number buttons. 1. are Enter the phone number you want to call, by touching the numeric buttons. 2. Touch the "SEND" button to make phone 3. a call with the entered number. When you finished the call, touch the "END" button. Notes ? Touch the "SEND" button for long to make a call from a latest call. ? The user's recent call history applies only connection.
Bluetooth calls Answering When you receive a call, your incoming call message. 1. The "CALL FROM" 2. Touch the screen phone rings appears on and the display an screen. "Accept" button to answer the call. reject a call, touch the "Reject" If you want to button. Notes ? If the Call-ID service is available, the caller's phone number displayed. If the phone number is in the phone book, phone book entry's name is displayed.
Radio SRC RSE (RDS) operation BAND to the radio stations Listening Press the "SRC" button to select the radio. 1. Press the "BAND" 2. repeatedly The mode switches as FM1tFM2 tFM3 Seek 3. tuning to select a band. follows. tAM(MW) : Touch the ?m The tuner will or M? buttons. scan the frequencies until a broadcast with strong enough signal is found. Manual tuning Touch the m : or M buttons repeatedly until a preset number you want is selected.
Radio RDS display options The RDS system is capable of transmitting information in addition to the initial call when (RDS) operation a display a wide variety of that appears station is first tuned. In normal RDS operation the sign will indicate the station name, broadcast network or call letters.
Radio (RDS) operation TA (Traffic This is identification) announcement ON/OFF an that indicates when switching signal traffic announcement is on Touch the "TA" button. 1. The "On" appears To 2. PTY You on the screen. cancel, touch it again. (Program type recognition) 1. select your favorite program Touch the "PTY" button. 2. The PTY list is 3. Touch can one (Music 4. a air. Touch displayed in the type. screen. of your favorite program types.
Radio R-TEXT (Radio text recognition) The information of radio station is 1. Touch the "R-Text" button. 2. To Radio text appears cancel, touch it on (RDS) operation the displayed on the screen. screen. again. Note Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not being transmitted, the screen will show a "Radio Text Information" message.
CD/MP3/WMA operation Playing audio CD and MP3/WMA disc an The disc is drawn in and play starts automatically. Notes ? The unit can MP3/WMA file format play recordings on CD-ROM, CD-R or CD-RW (DVD-ROM, DVD-R, DVD+R, DVD-RW, DVD+RW) discs. ? MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency (WMA) 2. Bit rate / within 8 4. - 48 kHz (MP3) 8 - 44.
CD/MP3/WMA Locating You can folder/file a using the list the folder list/track list before display This is available only for MP3 WMA starting 1. Touch the "LIST" button 2. Touch the folder button you want. Touch the file you want, and then file will be 3. ? Touch the ? Touch the previous ? to play. . during playback. button to select an played. upper folder. button in the current screen to return to the screen Touch the buttons to select the list you want to or view.
CD/MP3/WMA operation INFORMATION Touch the "Information" button When playing a disc during playback. containing information, you can see the CD TEXT/ID3 TAG information. In a CD TEXT, performer In a ID3 some and track TAG, some information about the disc title) (disc title, is recorded. information about the file (album title, Performer name, song title, recording year, music genre and a brief comment )is recorded. This unit can show ID3 TAG name).
DVD/VCD Playing a DVD/VCD disc The disc is drawn in, and "Disc reading" appears on display window, and playback starts automatically. If playback does not start, press the B button. the Notes ? It takes several seconds for the unit to detect ? In ? If cases, the disc some " " disc a type. appear instead. might the screen, the disc cannot on appears menu accept the you have tried. DVDs may have a region code.
DVD/VCD operation Play Touch the B button to start playback. Stop Touch the x button to stop. Pause 1. Touch the ** button 2. To return to during playback. playback, press the B button. Skip to the next Touch briefly Skip to the Touch chapter/track the M? button to select the next chapter/track. previous chapter/track the ?m button within 3 seconds of briefly Return to the beginning playing time.
DVD/VCD SEARCH Use the numeric buttons to select the chapter title you or want to view. 1. 2. Touch the screen The screen setup Touch the "Search" button. The number 3. screen displays on the screen. Touch the numeric 0~9buttons, then confirm. ? ? : Move a cursor to a desired information point. (TITLE/CHAPTER/TIME) : Delete the inputted number(s). ? 4. during playback. displays on the screen. : Enter a submenu. Touch the "ENTER" button.
DVD/VCD operation REPEAT Touch the "REPEAT" button during playback. The follows. menu item Off t Chapter Off t Track changes t ? Chapter : ? Title : ? Track : ? All : ? Off : Title... All... t as DVD VCD repeatedly the current chapter. repeatedly the current title. repeatedly the current track. repeatedly all files on the current Cancels repeat play. Plays Plays Plays Plays disc. Note If you change the source, turn the power off or eject the disc.
DivX Playing a DivX disc The disc is drawn in, and "Disc reading" appears on display window, and playback starts automatically. If playback does not start, press the B button. the Notes DivX disc ? (W ? with this compatibility is limited player as follows: Available resolution size of the DivX file is under 720x576 x H) pixels. The file name of the DivX subtitle has a length of 40 characters.
DivX operation Play Touch the B button to start playback. Stop Touch the x button to stop. Pause 1. Touch the ** button during playback. 2. To return press the B button. playback, Skip to the next file Touch briefly Skip to the Touch briefly the M? button to select the next file. previous file the ?m button. Search Touch the m or M buttons repeatedly required speed (X2, X4, X8, X16).
DivX REPEAT Touch the "REPEAT" button The item Off ? t changes One t One : Folder : ? All : ? Off : ? during playback. follows. as Folder t All... Plays repeatedly the current file. Plays repeatedly all files of the current Plays repeatedly all files of the current Cancels repeat play. folder. disc. AUDIO Touch the "Audio" button during playback. languages, you language during playback.
Photo operation files Playing photo The Photo viewer lets you view pictures from your device. This application recognizes JPG files. The previous Image display the previous and next or next Image arrow keys let image in the sequence you of image files located in the selected folder. The "Rotate" buttons let you move the image clockwise (or count clockwise). Each touch rotates the image 90 degrees. The Slide Show button lets you view all JPG current folder in Slide Show mode.
USB Playing USB device a the USB FLIP "USB detected" appears device, Plug display window and playback starts automatically. If playback does not start, press the B button. The way to use the files recorded in the same as when using a DISC. Locating You can a folder/file display using Touch the "LIST" button 2. Touch the folder button you want. Touch the file you want. ? Touch the ? Touch the previous ? the starting an to play. upper folder. screen to exit a screen.
Troubleshooting Cause Symptom Correction Power doesn't Leads and connectors turn properly on. The unit doesn't are not connected. Confirm once more connections The fuse is blown. Rectify the are that all correct. problem that caused the fuse to blow and then operate. replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are Turn the unit off and then on. causing the built-in microprocessor to operate incorrectly.
Country code list Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu.
Bluetooth ? If phone compatibility list phone as described in this list meets requirements of Bluetooth Hand-free Object Push Profile 1.1, it can operate. However, it is noted that this function can or can not be supported according to bluetooth phone features. As difference in functional operation are mainly resulted from the features of a hand-free phone, consult manufacturer of the phone if you have any guestion. even a Profile 1.
Specifications GENERAL Output Power...........................................................................................50W x 4CH (Max.) Power Source ...........................................................................................................DC 12V Speaker impedance.........................................................................................................4 Ω Ground System Negative Dimensions (W x H x D).............................................................
Support-Hotline * * You Update Software from http://www.lge.com/support/software.jsp for free. You can purchase the Upgrade Map from Authorized For can download the more LG information, contact Call Centre Subsidiary or Country LG Service Centres. Website. Service Number LG Electronics ESPANA S.A. SPAIN 902 500 234 LG Electronics U.K. Ltd U.K.
P/NO : MFL36334732
