Owner's Manual

Turning the unit on

Press MUTE/PWR (MUTE/PWR on the remote control) or any other buttons.

Note

: When you insert the CD in the CD slot, the unit turns on.

Turning the unit off

Press and hold MUTE/PWR (MUTE/PWR on the remote control).

Inserting a disc

Insert the disc, and starts playback automatically.

Ejecting a disc

Press EJECT. The disc automatically ejects from the loading slot.

When the disc is ejected by pressing EJECT during playback, it will be loaded automatically

after 10 seconds unless you remove the disc from the unit.

Selecting a source

Press SOURCE (SRC on the remote control) repeatedly to select a source.

Adjusting the volume

Rotate the volume knob on the control panel to adjust the sound level. Or press VOL.

on the remote control.

Note

: When you turn the unit off, the current volume level is automatically memorized.

Whenever you turn the unit on again, it will operate at the memorized volume level.

Mute

1 Press MUTE/PWR (MUTE/PWR on the remote control) to cut the sound.

2To cancel it, press again.

Checking the clock

You can see the clock pressing INFO on the control panel.

Note

If the the RDS broadcasting with CT(Clock Time) information is received by the unit, the clock

will be updated automatically in the display window. Unless, “NO CLOCK” appears in the

display window.

XDSS+ (Extreme Dynamic Sound System)

Press and hold EQ/XDSS to reinforce treble, bass and surround effect.

XDSS+ off (No display) t XDSS+

Dual Zone mode

You can listen to the main source through the speakers, and to the secondary source through

the monitor inserted into the cradle or the one connected the REAR OUT jacks.

Press RSE on the remote control repeatedly to select a source.

RSE ON t RSE OFF t RSE ON...

Note

: • The secondary source is only set to CD/DVD. If you set the main source to

D/DVD, you cannot use the dual zone mode.

• In dual zone mode, you can not use the PWR/MUTE, SRC and VOL.

but-

tons on the remote control.

Basic operation