Owner's Manual

Bluetooth operation

6. In an initial connection, the user will see the "INPUT PIN

CODE" screen as shown in the figure.

For successful connection, make sure to enter the same

PIN code (1234) for Bluetooth phone and the unit.

7. Touch the 0~9 buttons, then confirm.

8. Touch the “Enter” button to pairing complete.

9. If successfully connected, the Bluetooth phone will be

registered. You can confirm it with the checking mark in

the "CONNECT PHONE" screen.

Note

• When successfully connected, the icon will be displayed

on the upper right side of the "PHONE" screen.

• The icon is displayed in case of hands-free connecting.

Refer to “Headset functionality” for headset connecting.

• The icon for hands-free connecting

• The icon for headset connecting



Auto connection

1. The Bluetooth phone which has a previous record showing

that it has successfully connected will automatically start

the connecting process when starting a car.

2. Auto connection functionality operates if there is a

registered mobile phone in the "CONNECT PHONE"

screen and the "Auto Connection" is selected on the

"PHONE SETUP" screen.

Note

• Auto connecting operates continuously from the recently

connected Bluetooth phone (from the top of the list on the

"CONNECT PHONE" screen)

• Auto connecting process will take about 20 seconds for each

Bluetooth phone. (e.g. for 5 registered mobile phones, 100

seconds at maximum)