Owner's Manual

17
Bluetooth operation

Connection through Bluelooth phone
Turn on a Bluetooth phone.
Refer to your phone’s user guide.
1. Press the PHONE button to select the phone.
2. Touch the button.
The “PHONE SETUP” screen displays on the screen.
3. Touch the “Connect” button.
The “CONNECT PHONE” screen displays in the screen.
The Bluetooth phone can be found (searched) only on
the "CONNECT PHONE" screen.
4. Perform "searching a Bluetooth device" in the Bluetooth
phone.
5. Initiate the Pairing and Connecting process on the unit
searched.
6. In an initial connection, the user will see the "INPUT PIN
CODE" screen.
Note
• For successful connection, make sure to enter the same
PIN code for Bluetooth phone and the unit.
• The same instructions as "connecting through the unit"
apply correspondingly to the following.
Headset functionality
Connecting method is same as "Hands-free connection",
but the icon is displayed on the upper right side of
"PHONE" screen right after connected.
• It operates the same as the wired headset for Bluetooth
phone. The headset functionality is for telephone
conversation.
It is not for listening to music.
• Unlike the hands-free functionality, Headset connection will
allow only two functions “answering calls” and “making a call
from the latest call”.
Also the caller’s number is not displayed when answering
calls.
Note
• If connecting through the unit, initiate the hands-free
connection first. If your Bluetooth phone does not recognize
the hands-free connection, then initiate the headset
connection.
• If connecting through a Bluetooth phone, the hands-free
connection or headset connection may operate depending
on the type of the phone.