Owner's Manual
Menu and Map display
37
Guide mode
The map of your surroundings is shown on the left, and an
arrow indicating the direction of travel is shown on the
right.
- Refer to the page 50 for details. (Route Overview)
Trace mode
You can check information about the route between your
current location and your destination.
b : Go backward from current position.
B : Go forward from current position.
[b : Go to start point.
[[ : Pause
: Check the trace mode at x1, x2 and x3 speed.
CANCEL : Return to the previous screen.
Simulate mode
You can review the route you would go on before
instructing navigation to calculate your route.
GPS Information
You can check the reception signals from the GPS
satellites. such as information about your satellite fix, and
the latitude, longitude and altitude of your position.
The color of the icons indicates the signal reception
status. The green represents a satellites whose signals
are actually being used for positioning.
The red means that signals are being picked up but are
not currently in use for positioning.
Speed : The rate of movement, as expressed by
kilometers or miles per hour.
Note : Indicates the connection status of the GPS.
If press this button, the enlarged map disappears.