Owner's Manual

Setting the route
52
Detour
You can set the length of the area, and avoid just that area, or
you can even search a new route from the current location to
your destination.
1. Touch the distance from the list.
2. Route calculation starts automatically.
3. The “ROUTE OVERVIEW” screen displays on the screen.
Note
On the map screen during route guidance, try the operation.
New Start Point
The New Start Point is the function to change the start point
site simulating where to drive using the navigation before
driving actually. When changing the start point site, the “New
Start Point” button is changed into the “Current Position”
button.
MENU > Route > New Start Point n Current Position
Touch the “Current Position” button when you want to return
to the current start point where it receives the GPS signal.
Touch the button when you want to return to the current
start point where it receives the GPS signal.
Note
• If you set a start point and a destination, the navigation
displays a map that shows you the route. In this operation,
the satellite-based global positioning system (GPS) is not
used. Your current position is not detected and
navigation does not keep track of your driving progress.
Use the Change start Mode for trip planning.
• If you set a start point outside memory point, the simulation
will be limited.
b