LAN9700R.DGBRLLR_LGEUK_ENG_MFL37340895 LAN9700R ENGLISH In Dash Navi & Infotainment System with Bluetooth Read the manual carefully before using the unit.
Safety notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety notes About this unit Before installing the unit • This product is for vehicles with a 12-volt battery and negative earthing. Check the battery voltage of your vehicle before installation. • To avoid shorts in the electrical system, be sure to disconnect the (–) battery cable before beginning installation. CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.
Safety notes Types of Playable Discs Precautions of handling discs and player DVD (12 cm disc) • A defective or soiled disc inserted into the unit can cause sound to drop during playback. • Handle the disc by holding its innerouter edges. • Do not touch the surface of the unlabeled side of the disc. Video CD (VCD) (12 cm disc) Audio CD (12 cm disc) In addition, this unit plays DVD±R, DVD±RW and CD-R or CD-RW containing audio titles, MP3, WMA, JPEG, or DivX files.
Safety notes About the Symbol Display NOTES ON COPYRIGHTS When you are watching a DVD and attempt to perform an operation, it may not be performed due to the programming on the disc. When this happens, the unit indicates the on the screen. It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs.
Table of contents Control panel/Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-14 Connecting the system . . . . . . .
Table of contents DVD/VCD operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-48 Playing a DVD/VCD disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Play/ Stop/ Pause/ Skip to the next chapter/track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Skip to the previous chapter/track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel/Monitor 1 2 3 4 5 11. RDS • Selects the TA on/off. (Press a short time.) • Selects the AF on/off. (Press a long time.) 12. EQ Selects various equalizer curves. 6 7 8 9 10 13. EJECT Ejects a disc from the unit. 11 12 13 14 15 1617 14. Disc slot 15. PHONE ( ) Selects the bluetooth mode. 16. Arrow keys (up/down/left/right) • Selects the folders. • Selects the menu. • Skip (Push a short time.) • Seek (Push a short time.
Remote Control 1 V/b b/B B (up/down/left/right) 4. v/V Selects an item in the menu. ENTER Confirms menu selection. 6 2 3 5. 0-9 number buttons • Selects numbered items in the menu. • Selects a stored radio station frequency (1-6). REPEAT Repeats chapter, track, title or file. SHUFFLE CD/MP3/WMA Plays tracks or files in random order. SCAN CD Plays the first 10 seconds of all track. AUDIO DVD DivX Selects audio language. SUBTITLE DVD DivX Selects audio subtitle language.
Remote Control / Accessories Install the battery of remote control Accessories Protective Case Pull the tray on the back of battery of remote control outward with a pencil or ball point pen and insert the battery with the plus (+) minus (-) poles pointing in the proper direction. Remote Control Remote Control Battery 1. Remove the battery holder with a pencil or ball point pen. 2. Install the battery on the battery holder. 3. Install the battery holder back into its original position.
Connection Connecting the system Vehicle connector Power cord A4 A5 A7 A6 A8 A4 Yellow TO BATTERY (+)- To the car battery, continuos +12 V DC. A5 Blue POWER ANTENNA- To the power antenna A6 Orange DIMMER- This lead is for the dimmer line connection. A7 Red TO IGNITION- To the terminal from which the power is supplied when the ignition switch is set to ACC. A8 Black GROUND (-) - To the car body. Blue/White REMOTE ON- To the amplifier remote on.
Connection Connecting to serarately sold auxiliary device To VIDEO IN To AUDIO IN To VIDEO OUT AUX V (AUX Video) AUX-R (AUX Right) Auxiliary Device (CAR TV, etc) (Sold seperately.) To AUDIO OUT AUX-L (AUX Left) To VIDEO IN CAM V (Camera Video) Rear view camera (Sold seperately.) To VIDEO OUT To AUDIO IN To AUDIO OUT Monitor for rear seat (Sold seperately.) To VIDEO OUT To VIDEO IN To AUDIO OUT To AUDIO OUT To AUDIO IN RR (Rear Right) RL (Rear Left) Amplifier (Receiver) (Sold seperately.
Connection Connecting the radio antenna of the vehicle Connect the radio antenna of the vehicle to the antenna jack of the unit. • The GPS antenna is installed with a magnet. When installing the GPS antenna, be careful not to scratch the vehicle body. • Do not paint the GPS antenna, as this may affect its performance. Note Do not cut the GPS antenna lead to shorten it or use an extension to make it longer.
Connection Connecting to a rear view camera When using the unit with a rear view camera, automatic switching to video from a rear view camera is possible when the gearshift is moved to REVERSE (R) position. Rear view mode also allows you to check what is behind you while driving. Notes • Use input only for reverse or mirror image rear view camera. Other use may result in injury or damage. • The screen image may appear reversed.
Installation Basic installation ISO-DIN Installation Before installing, make sure that the ignitionswitch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1. Slide the unit into the ISO-DIN frame. 2. Install screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate. 5. Install the trim ring to the unit. 1. 2. 3. 4. Remove the existing receiver unit. Make the necessary connections.
Basic operation Turning the unit on Mute Press any other buttons (POWER on the remote control) except or EJECT button on the control panel. Press the “VOL” knob while listening to any source. To resume the previous volume level, press the button again. Note When you insert the disc in the disc slot, the unit is turned on automatically. Changing the monitor angle Press the “TILT” button to adjust the LCD panel to an easily viewable angle.
Basic operation Selecting a EQ (Equalizer) Rear Seat Entertainment Press the “EQ” button repeatedly to select a equalizer. The mode switches as follows. FLAT t POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER t XDSS+ t FLAT... You can output any other sources via front monitor when you are playing a disc via monitor for rear seat connected to RSE OUT. 1. Insert a disc in the disc slot and playback will start automatically. 2.
Basic operation Selecting a source with remote control : Touch when you want to play an auxiliary device. Press SRC (SOURCE on the remote control) repeatedly to select a source. The mode switches as follows. TUNER t DVD/CD t AUX t TUNER... : Touch when you don’t want to select a source. (A Time, date and day appear on the screen.) If you cancel it, touch the screen. Selecting a source on the screen You can select the source on the screen to make it operate according to your particular needs.
Basic operation SCREEN There are seven kinds of screen menu : Brightness/Contrast, Change Color, Adjust Dimmer, Language, Clock, Setback, Rear Camera Language You can set the display language. Touch the language button you want. Note Brightness/Contrast You can set the brightness and contrast of screen. Use or if necessary. to scroll up or down one page Clock You can set the summer time. Touch or to adjust the settings. Change Color You can set the background color of screen.
Basic operation Rear Camera • On: The rear view through the rear view camera is automatically displayed on the monitor when the rear gear is applied. • Off: Cancels the function. SOUND User Equalizer You can adjust the sound modes and store your own adjustments in memory. Touch or to adjust the level of each frequency band. Beep There are four kinds of sound menu: Balance/Fader, User Equalizer, Beep, Rear Speaker • • Balance/Fader • : Cancels the function. : When long pressed, a beep sound occurs.
Basic operation DVD • • There are four kinds of DVD menu: DVD Language, Aspect Ratio, Lock, DivX Registration • : Confirm the entered code. : Delete the previous character at the cursor position. : Cancels the functions. Aspect Ratio Select the monitor type of your unit to play a DVD recorded with an aspect ratio of 16:9. Note This is only available only when you select the DVD/CD source. DVD Language Select when your screen’s aspect ratio is fixed at 16:9 (Wide screen).
Basic operation Lock You can secure the device against unauthorized use by assigning a password. In addition, you can specify a rating level. If you set a rating level that is lower than the one found on the inserted DVD, it can be played only after entering the password. If you have already assigned a password, first enter the old password with the number buttons 0-9. 1. Touch the v or V buttons to select the area code. See page 59 to find the area code. 2. Touch the “End” button to exit the setup menu.
Basic operation RDS TA Mode There are two kinds of RDS menu: PI Mode, TA Mode PI Mode When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same TP information as well as the same PI as the last station. When a newly tuned station has no TP information for 5 seconds, a beep sound is output. If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now.
Getting started with navigation What is GPS? The Global Positioning System (GPS) is a satellite-based navigation system made up of a network of 24 satellites placed into orbit by the U.S. Department of Defense. GPS was originally intended for military applications, but in the 1980s, the government made the system available for civilian use. GPS works in any weather conditions, anywhere in the world, 24 hours a day. There are no subscription fees or setup charges to use GPS. GPS GPS 4.
Getting started with navigation Finding the registered the destination Guide mode 1. Press “NAVI MENU” button on the map screen. Touch on the screen. (Refer to the step 6 on the page 24.) Mode in which guidance is given as you drive to your destination (the system automatically switches to this mode as soon as a route has been set). The map of your surroundings is shown on the left, and an arrow indicating or illustrating the direction of travel is shown on the right.
Getting started with navigation Simulation mode Touch on the screen. This is a demonstration function for shops. After a route is set, the simulation of the route guidance to a destination is automatically displayed. 3. Touch . **“WHOLE ROUTE OVERVIEW” screen appears on the screen. The selected way point 4. Touch to find a destination. Drive in accordance with the screen and voice information.
Getting started with navigation Indicators of the map screen GPS status indicator You can check reception signals from the GPS satellite, such as information about your satellite fix, latitude, longitude and speed of your car. The current location of your vehicle The arrow icon (or car icon) indicates your heading, and the display moves automatically as you drive. The color of the icons indicates the signal reception status.
Getting started with navigation A communication system for informing drivers of the latest traffic information using FM multiplex broadcast. Information such as traffic jams or accidents can be checked on the display. When a route has been calculated, touch to check whether there is any traffic jam or closure information on your route. When no route has been calculated, touch to display the traffic list. - Please see page 35-36 for details.
Navigation menu Navigation menu list General operations of navigation menu 1. Turn the unit on. 2. Press OPEN/CLOSE to open the monitor. 3. Press NAVI MENU. The navigation menu appears. 4. Touch , , , or to select the desired option and the menu moves to the second level. 5. Touch the desired option and the menu moves to the third level. 6. Touch the desired setting then touch to confirm your selection. Some items require additional steps. 7. Press NAVI to move to the map screen.
Navigation menu DEST. (DESTINATION) 4. Touch . Drive in accordance with the screen and voice information. You can seach the destination by selecting the registered location. Favorites You can register the location up to 100 in the “Favorites” menu. You can find the registered destination by using the “Favorites” menu. 1. Press NAVI MENU. > Touch DEST. > Favorites. Recent Destinations The locacions are displayed in distance order.
Navigation menu POI Search The POI list is a collection of hundreds of interesting or useful places organized by easy-to-find categories. Searching the POI near the point you set 1. Touch . Information about various facilities (Points of Interest POI), such as gas stations, amusement parks or restaurants is available. By selecting the category (or entering the POI Name or Position), you can search for a POI. 2. Touch the desired item. : Press NAVI MENU. > Touch DEST. > POI Search.
Navigation menu Name search You can search the POI within the selected region. 1. Touch . 3. Touch the desired items. : You can search a city. : You can search the address in city, street , house number order. : You can search the address in postcode, city, street, house number order. : You can search the address in city, street order. 2. Input the address serach pop-up by touching the keypad buttons. Enter name is displayed.
Navigation menu 2. Touch the desired items. Finding User1/ User2 location After you set your User1/User2 location, you can route to it at any time. 1. Press NAVI MENU. : You can set the current position to home/ User1/ User2. : You can set the address you search to home/ User1/ User2. : You can set the POI you search to home/ User1/ User2. : You can set the recent destination you select to home/ User1/ User2. Finding home After you set your home location, you can route to it at any time. 1.
Navigation menu Route Summary Press NAVI MENU. > Touch ROUTE > Route Summary. The “TURN BY TURN SUMMARY” screen appears on the screen. Note The avoid function is used to search for a path to avoid Tolls, Motorways and Ferry crossings. However, Toll, Motorways and Ferry may be included in some paths where bypass to the destination is severe. Recalculate The route from the current position to your destination is recalculated. Refer to the page 25 for details. Route Options Press NAVI MENU.
Navigation menu RDS TMC : You can set the address you search to way point. : You can set the POI you search to way point. : You can set the recent destination you select to way point. You can check traffic information transmitted by the FM radio service through the Radio Data System (TMC) on the display. Such traffic information is updated periodically. When you receive traffic information, the Navigation System automatically displays an icon informing you of the traffic information.
Navigation menu Display Icons Notes • A line indicates the length of the traffic jam. It appears only when the scale on the map is 800 m or lower. Stop and go : Orange Stopped traffic : Red Closed/Blocked : black • Icon for traffic information appears only when the scale on the map is 800 m or lower. • If there is a traffic jam on your route (at least 1 km ahead on an ordinary road, while driving on the motorway, 3 km ahead), the navigation system automatically searches for detour possibility.
Navigation menu SETUP Volume Map Display You can set the sound volume for navigation. • Dimension 2D: The 2D view is the straight-forward two-dimensional view. This is the default map view. In this view, the map is dynamically updated, and allows for manual panning and zooming. 3D: The 3D view is a simplified three-dimensional view showing the map in a basic 3D relief. It shows the basic outline and details of the surrounding roads and general area. Touch or buttons to change the guidance volume.
Navigation menu Color Display Note You can listen to the voice about road name only when the language set for TTS and the nation that you’re driving now. The voice information and its pronunciation may not be correct or be played back with low quality. You can set the background color. • Icon Type You can display the icon type on the map screen of current position by touching or . • Speed Camera ON: When the speed camera is active, you can hear the camera warning voice information.
Bluetooth operation Understanding Bluetooth wireless technology 3. Touch The “ ” pop-up screen appears on the screen. Bluetooth wireless technology establishes a wireless link between two devices, such as your phone and the unit. The first time you use two devices together you must connect them by establishing a relationship using a PIN code. After the initial connecting, the two devices can connect automatically each time you turn them on.
Bluetooth operation To connect using the phone settings Your phone’s Bluetooth feature may be set to off by default. To use the Bluetooth feature, Bluetooth must be turned on in your phone. Refer to your phone’s user guide. • Unlike the hands-free functionality, Headset connection will allow only two functions “answering calls” and “making a call from the latest call”. Also the caller’s number is not displayed when answering calls. 1. Enable the phone’s Bluetooth component.
Bluetooth operation Making a call with phone number Making a call with speed dial numbers Connect your unit and bluetooth phone before you make a call. To make a call from a speed dial numbers, press for a long after pressing the speed dial number assigned to the Bluetooth phone, or press the last digit of the speed dial number for long. Ex) When making a call from the speed dial number 10, touch 1 and touch 0 for long. 1. Press the PHONE ( ) button on the control panel. The “PHONE” screen appears. 2.
Bluetooth operation Answering calls Searching the phone number 1. When you receive a call, your phone rings and the “Call from” pop-up screen is displayed on the screen. You can search a contacts entry you want. 1. Touch on the “PHONE BOOK” screen. 2. Touch to answer the call. If you want to reject a call, touch Note • Touch to change touch button language into Latin. Touch to change touch button language into alphabet on the Latin touch screen. .
Bluetooth operation Adding the phone number Deleting the phone number You can copy the phone book entries are supplied on the memory of phone to the unit. 1. Touch on the “PHONE BOOK” screen. The “Waiting Data...” screen displays on the screen. You can delete all the list. 1. Touch on the “PHONE BOOK” screen. 2. Touch 2. When you choose "Telephone No. Item Transmission" in the bluetooth phone, you can search LAN9700R. (The bluetooth phone control method may differ according to the manufacturer.
Bluetooth operation SETUP You can make various adjustments to items by using the setup menu. - Info. (Information) Touch and the pop-up screen displays in the screen. 1. Press the PHONE ( ) button on the control panel. And then Touch . The “SETUP” screen appears. * Auto Connection Bluetooth phone can be automatically connected, if there is a registered Bluetooth phone in the “CONNECT PHONE” screen and the “Auto Connection” is selected on the “INFORMATION” screen.
Bluetooth operation Bluetooth Info. ( ) You can check the Bluetooth phone information. Name ( ) You can change the Bluetooth phone name. 1. Touch and the “BLUETOOTH INFORMATION” screen displays in the screen. Save PIN Code ( ) You must select to connect successfully your unit and bluetooth phone. On ( )/Off ( ) Touch if you want to connect your unit and bluetooth phone. Unless, touch . Changing the PIN code 1. Touch . And then input the PIN code you want to change. 2.
DVD/VCD operation This is available only for VCD . 1. Touch the screen in the menu screen. Playing a DVD/VCD disc The disc is drawn in, and “Disc reading” appears on the display window, and playback starts automatically. If playback does not start, touch the screen and then touch . DVD OSD menu 2. Touch the number 0~9 buttons, then confirm. • : Move a menu bar to up or down. • : Return to the previous screen. • : Moves to the VCD OSD menu. • : Enter to sub menu.
DVD/VCD operation Still picture and frame-by-frame playback 1. Press (X on the remote control) during playback. The unit will now go into the PAUSE mode. 2. You can advance the picture frame-byframe by pressing X repeatedly on the remote control. 3. To return normal playback, press (PLAY B on the remote control). MENU DVD The menu may contain camera angles, spoken language, subtitle options and chapters for the title. 1. Touch the screen during playback. The setup screen displays on the screen. 2.
DVD/VCD operation REPEAT ANGLE Touch the “ ” button during playback. The menu item changes as follows. OFF t CHAPTER t TITLE... DVD ALL t TRACK t ALL... VCD • CHAPTER: Plays repeatedly the current chapter. • TITLE: Plays repeatedly the current title. • TRACK: Plays repeatedly the current track. • ALL: Plays repeatedly all files on the current disc. • OFF: Cancels repeat play. Touch the “ ” button during playback.
DivX operation Playing a DivX disc Play The disc is drawn in, and “Disc reading” appears on the display window, and playback starts automatically. If playback does not start, touch the screen and then touch . Touch the button to start playback. Stop Touch the button to stop. Pause 1. Touch the button during playback. 2. To return to playback, press the button.
DivX operation Slow motion SUBTITLE 1. Press (X on the remote control) during playback. The unit will now go into the PAUSE mode. 2. Use on the remote control to select the required speed: T 1/16, T 1/8, T 1/4, or T 1/2 (forward). 3. To exit Slow Motion mode, press (PLAY B on the remote control). Touch the “ ” button during playback. If the disc contains multi-subtitle languages, you can change to a different subtitle language during playback.
CD/MP3/WMA operation Skip to the previous track/file Playing an audio CD and MP3/WMA disc Touch briefly the of playing time. The disc is drawn in and play starts automatically. Return to the beginning of the current track/file Touch briefly the playing time. Notes button after 5 seconds of Search • The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW (DVD-ROM, DVD-R, DVD+R, DVD-RW, DVD+RW) discs. • MP3/WMA Disc compatibility with this unit is limited as follows: 1.
CD/MP3/WMA operation SCAN Locating a folder/file using the list This is available only for CD . Touch the “ ” button during playback. The item changes as follow. All t Off (No display) t All... • All: Plays the first 10 seconds of all tracks on the disc. You can display the folder list/file list before starting to play. This is available only for MP3 WMA . 1. Touch the “ ” button during playback. REPEAT Touch during playback. The default setting plays all files in the disc.
Photo operation Playing photo files Locating a folder/file using the list The Photo viewer lets you view pictures from your device. This application recognizes JPG files. The disc is drawn in and play starts automatically.(Slide show mode) You can display the folder list/file list before starting to play. 1. Touch the “ ” button during playback. The previous Image and next Image arrow keys lets you display the previous or next image in the sequence of image files located in the selected folder.
Radio (RDS) operation The selected preset station has been stored in memory. Listening to the radio stations 1. Press the “SRC” button to select the radio. 2. Press the “BAND” repeatedly to select a band. The mode switches as follows. FM1 t FM2 t FM3 t MW 3. Seek tuning : Touch the or buttons. The tuner will scan the frequencies until a broadcast with strong enough signal is found. Manual tuning : Touch the or buttons repeatedly until a preset number you want is selected.
Radio (RDS) operation AF (Alternative frequency) When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. This means : wherever you drive, you can continue to listen to the same program without interruptions. 1. Touch the “ ” button. “AF On” appears on the screen. 2. To cancel, touch it again. Station C broadcasting Station A on frequency C. broadcasting on frequency A.
Troubleshooting Cannot identify the current location. (GPS not receiving) Cannot see the map. GPS cannot be used indoors and must be connected to a power source with ACC in a vehicle in a location where the signal from the sky can be received easily. When initially connecting the GPS, it usually takes about 10 minutes to be working normally, but the connection speed can differ depending on the weather condition, and surrounding obstacles.
Troubleshooting Map matching About speed camera As mentioned, the GPS systems used by this Mobile Navigation System are susceptible to certain errors. Their calculations may on occasion place you in a location the map where no road exists. In this situation, the processing system understands that vehicles travel only on roads, and is able to correct your position by adjusting it to a nearby road. This is called map matching. Use of the speed camera may be illegal in some countries.
Troubleshooting Symptom Power doesn’t turn on. The unit doesn’t operate. Cause Correction Leads and connector are not properly connected. The fuse is blown. Noise and other factors are causing the built-in microprocessor to operate incorrectly. Confirm once more that all connections are correct. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Turn the unit off and then on. Playback is not possible. The disc is dirty.
Language Codes/Area Codes Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Bluetooth phone compatibility list • If even a phone as described in this list meets requirements of Bluetooth Hand-free Profile 1.0 and Object Push Profile 1.1, it can operate. However, it is noted that we cannot assure for operation by function. • As difference in functional operation by model is mainly resulted from feature of a hand-free phone, consult manufacturer of a phone if you have any question.
Bluetooth phone compatibility list Manufacturer Model Nokia E62 Nokia E70 Nokia N73 Nokia N80 Nokia N92 Nokia E60 Nokia E61 Nokia 3650 Nokia 6103 Nokia 6131 Nokia 6230 Nokia 6230i Nokia 6280 Nokia 6630 Nokia 6650 Nokia 6600 Nokia 6670 Nokia 6680 Nokia 6820a Nokia 7370 Nokia 7380 Nokia 7610 Nokia 8910i Nokia 9500 Motorola V500 Motorola V360 Motorola E680 Motorola E680i Motorola A780 Motorola V3X Motorola U6 Motorola V360 Motorola V525 Motorola E550 Motorola V600 Motorola E1000 Motorola A1000 Motorola RAZR
Bluetooth phone compatibility list Manufacturer Model Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Sony Erricson Simens Simens Simens Simens Pantech Panasonic NEC NEC Sharp Sharp K-JAM P990i T610 W710i K800i W85Oi T610 Z600 S700i K700i V800 SL75 S65 SX1 SK65 PG6200 X800 N750 N930 GX15 GX30 i_mate Dialing Phone Search Pairing Connect Disconnect Search Pairing Connect Disconnect Reject Answer DTMF-Tone Audio switch Hang up
Specifications GENERAL Output Power ..................................................................................................50W x 4CH (Max.) Power Source ..................................................................................................................DC 12V Speaker impedance ................................................................................................................4 Ω Ground System ...............................................................................
Support-Hotline You can get the Map Upgrade information from LG Authorized Service Center. For more information, contact Call Center or Website. LG Subsidiary Country Service Number LG Electronics ESPANA S.A. SPAIN 902 500 234 LG Electronics U.K. Ltd U.K. / IRELAND 0870 873 5454 LG Electronics France FRANCE 0825 825 592 LG Electronics Deutschland GmbH GERMANY 01805 4737 84 LG Electronics Italia S.p.A ITALY 199600099 LG Electronics Hellas S.
