ENGLISH OWNER’S MANUAL SoundPlate™ LAP340 / LAP341 Please read this manual carefully before operating your set and retain it for future reference. LAP340-NB_DHKGLLK_ENG.
LAP340-NB_DHKGLLK_ENG.
1 Getting Started Getting Started Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents 5 Table of Contents 1 Getting Started 3 6 6 6 7 7 8 10 Safety Information Unique features Introduction Accessories Front panel Rear panel Remote control Setting up the unit 2 Operating 13 13 13 14 15 15 16 Basic operations – Optical input operation – LG Sound Sync – AUTO POWER On/Off Using Bluetooth technology – Listening to music stored on the Bluetooth devices CINEMA SOUND 3 Troubleshooting 17 Troubleshooting 4 Appendix 18 19 19 19 Specifications Trademarks and licenses
Getting Started Unique features 1 LG Sound Sync Getting Started Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. Accessories Please check and identify the supplied accessories. Designs and specifications of the accessories are subject to change without prior notice. Bluetooth Enjoys music from bluetooth device with simple connection.
Getting Started 7 Front panel 1 Getting Started A Remote sensor B LED indicator You can check the current state of the unit by the colour LED on it. Refer to the table below. LED Colour LED State Red Orange Off Green White Power on or disconnected power cord On Standby - - - Blink (Twice rapidly) CINEMA SOUND is off. - CINEMA SOUND is on.
Getting Started Remote control 1 Getting Started Switches the unit ON or OFF. Reduce the sound volume. Mutes or unmutes the sound. Select LG TV function. Turns on or off CINEMA SOUND function. Increase the sound volume. Select Optical function. Select Bluetooth function. ,,Note yy Once the unit is shut down to standby, please wait several seconds before trying to use remote again. yy When you press any button on the remote control, the red LED on the main unit blinks twice.
Getting Started Battery installation >>Caution 9 3. Put the battery cover on the remote control and turn it clockwise to close. Do not open the battery cover by using your finger. Or else, your nail could break. 1 Getting Started 1. Turn the battery cover counterclockwise by using a coin. Then take the battery cover. !Warning yy DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. 2. Insert and fix the battery with the minus (-) facing in the same direction as the minus (-) on the battery compartment.
Getting Started Setting up the unit 1 This unit is designed to be positioned under your TV. Getting Started Before setting up this system with your TV, make sure your TV's specifications. yy Weight >>Caution yy Do not try to set up this unit alone. It may need at least 2 persons to lift your TV. Otherwise it may result in a personal injury and/or property damages. yy Do not connect a CRT type TV to this unit.
Getting Started 2. Connect the optical cable and the power cord to the unit. 11 ,,Note You can arrange the cables of the unit. 1. Fix the cable holder with screws. 1 Getting Started 2. Arrange the cables as the below. 3. Connect another end of optical cable connecting the unit to your TV. 4. Place your TV on the centre of the unit. 5. Plug in the power cord of the unit. LAP340-NB_DHKGLLK_ENG.
Getting Started >>Caution 1 yy Do not place your TV on the edge of this unit. Otherwise it may result in a personal injury and/or property damages. How to Affix the Ferrite Core (Optional) You may need to attach Ferrite core in order to reduce or eliminate any electrical interference. Getting Started yy If your TV is over recommended weight (max 38 kg) or has a Base larger in area than the Unit do NOT place TV on the Unit.
Operating Basic operations Optical input operation ,,Note -- Mute your TV. -- Select [Off ] on the TV sound setup menu not to output the sound through the TV. -- Select [Optical output] on the TV sound setup menu to listen to the sound through this unit. 1. Connect your TV to the unit by using an optical cable. (Refer to the pages 10 - 11.) 2. Turn on the unit by pressing 1 (Power) on the remote control. 3. Select OPTICAL function by using OPTICAL on the remote control.
2 Operating With wired connection AUTO POWER On/Off 1. Connect your LG TV to the unit by using an optical cable. (Refer to the pages 10 - 11.) 2. Set up LG Sound Sync (Optical) on the TV. Refer to the TV's instruction manual. This function automatically turns on/off the unit when you turn on/off the TV or the external device (DVD Player, Blu-ray Disc Player, etc.) connected to this unit. 3. Turn on the unit by pressing 1 (Power) on the remote control.
Operating Auto power down This unit will turn itself off to save electric consumption in the case were main unit is not connected to external device and is not used for 25 minutes. About Bluetooth Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when there is interference by the other electronic waves which run on same frequency or if you connect bluetooth devices in the other rooms nearby.
Operating ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. 2 Operating -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device.
Troubleshooting 17 Troubleshooting PROBLEM No Power No sound CAUSE & CORRECTION yy The power cord is unplugged. Plug in the power cord. yy Check the condition by operating other electronic devices. yy Incorrect input source is selected. Check the input source and select the correct input source. yy The mute function is activated. Press i or adjust the volume level to cancel the mute function. 3 The remote control does not work properly.
Appendix Specifications General Power requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Dimensions (W x H x D) (700 x 38.5 x 320) mm (With foot) Net Weight (Approx.) 3.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs DIGITAL IN (OPTICAL IN) 3.3 V (p-p), Optical jack Available Digital Input Audio Sampling Frequency 32 kHz, 44.
Appendix Trademarks and licenses 19 Maintenance Handling the unit Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
LAP340-NB_DHKGLLK_ENG.
