SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar Model : LAS950M ENGLISH | OWNER’S MANUAL To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. The actual product may differ from the image. www.lg.com Copyright © 2015-2017 LG Electronics.
Getting Started Safety Information CAUTION 1 Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 25 28 1 Getting Started 2 6 6 7 8 8 9 10 10 10 Safety Information Main Features Introduction Accessories Front panel Rear panel Remote control Installing the sound bar – Installing the cover foot Mounting the main unit on a wall 2 Connecting 12 13 13 13 14 15 15 Wireless subwoofer connection Connection overview Connecting to your TV – Using an OPTICAL cable – LG Sound Sync – Using an HDMI cable – Enjoy rich sound broadcast of the channel with the sound bar –
Table of Contents 56 56 56 56 57 57 57 57 58 58 58 58 59 59 59 59 59 60 60 60 60 60 60 Using a Bluetooth Wireless Technology – About Bluetooth – Bluetooth profiles – Listening to Music of a Bluetooth Device Other operations – DRC (Dynamic Range Control) – AV Sync – Using your TV remote control – Turn off the sound temporarily – Displaying input source information – Sleep timer setting – Auto power down – AUTO POWER On/Off Sound adjustment – Adjust volume level automatically – Adjust the Treble/Bass/Sub-woo
Getting Started Main Features 1 Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. Portable In Listens to music from your portable device. Music Flow Player application Listens to music stored on your smart device.
Getting Started 7 Accessories Please check and identify the supplied accessories. Remote control (1) Batteries (2) Wall bracket (2) Wall bracket install guide (1) Screws (2) Cable ties for arranging cables (2) Foot IR Blaster Optical 1 Getting Started Designs and specifications of the accessories are subject to change without prior notice.
Getting Started Front panel 1 Getting Started F p/o (Volume) Adjusts volume level. A Display window B Remote sensor C LED indicator Shows connection status. (Wi-Fi) G D 1/! (Standby/On) - Power On - Switching to the standby mode (page 60) E F (Function) Selects the function and input source. Connects your speaker to your network. (page 25) (Add) H Adds the speaker to your network.
Getting Started Remote control 9 • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. FUNC : Selects the function and the input source. (Mute) : Mutes the sound. : Adjusts sound level of Treble, Bass and Subwoofer. VOL o/p : Adjusts speaker volume. • • • • • • • • • • b • • • • • • • • • • REPEAT : Listen to your music repeatedl-y. C/V (Skip) : - Skips Fast backward or Forward. dM (Play/Pause) : Starts playback.
1 Getting Started Getting Started Installing the sound bar Mounting the main unit on a wall You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can mount the main unit on a wall. Place the unit in front of the TV and connect it to the device you want. (Refer to pp. 13 - 19) You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. TV 1 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill. ,,Note To detach the unit, perform it in reverse order.
Connecting Wireless subwoofer connection 3. If the LED of the wireless subwoofer already blinks in green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. LED indicator of wireless subwoofer LED Color Status 2 Green (Blink) The connection is trying. Connecting Green The connection is completed. Red The wireless subwoofer is in standby mode or the connection is failed.
Connecting 13 Connection overview Connecting to your TV Connect or disconnect the jack in order of the image. Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. Using an OPTICAL cable OUT IN 1 (TV ARC) Optical cable or 2. Set the input source to OPTICAL. Press repeatedly FUNC on the remote control or F on the unit until the function is selected.
Connecting LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical cable. 2 You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Optical cable Connecting Controllable function by LG TV’s remote control : Volume up/down, mute Refer to the TV’s instruction manual for the details of LG Sound Sync.
Connecting Using an HDMI cable HDMI cable Checklist If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Some HDMI cables do not support the ARC function, this can result in no sound output. Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV using an HDMI cable.
Connecting What is SIMPLINK? ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. 2 Controllable functions by LG TV’s remote control : Power on/off, volume up/down, etc. Connecting Refer to the TV owner’s manual for the details of SIMPLINK function.
Connecting Additional information for HDMI yy When you connect an HDMI or DVI compatible device make sure of the following: 17 Optional equipment connection - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. HDMI connection - The connected device’s video input is set correctly for this unit. You can enjoy the sound from the external device you connect.
Connecting For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. PORT. (Portable) IN connection 2 Connecting IN 1 IN 2 IN 3 OUT (TV ARC) Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect HDMI IN 1, HDMI IN 2 or HDMI IN 3 jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. 2.
Connecting 19 OPTICAL IN connection Connecting IR Blaster Connect an optical output jack of external devices to the OPT. IN jack. IR blaster is supplied as an accessory with the unit in order to communicate well with the remote control and the TV. Remote control of your TV may not be operated if the unit hides the remote sensor of the TV. You can solve the problem by connecting IR blaster with LG TV. 2 Connecting Optical cable To the optical output jack of external device 1. Connect the OPT.
Connecting 2 Initial Multi-Room Setup Installing “Music Flow Player” App When installing the MUSICflow product for the first time, you can choose two types of connection as below. Through Apple “App Store” or Google “Play Store” Connecting Wired connection (MUSICflow Mesh Network Connection) Connect your speaker to the home router using LAN cable. Then you can connect the additional MUSICflow products (Optional) to your home network wirelessly.
Connecting ,,Note yy Make sure that your smart device is connected to the internet. 21 3. Select [Connect product] to install the speaker you’ve purchased. yy Make sure that your smart device has a scanning application. If you don’t have, download it from Apple “App Store” or Google “Play Store”. Starting with Music Flow Player app 1. Check the contents of terms of use and select [Accept]. Refer to “Connecting the speaker to your Home Network” on page 22.
Connecting Connecting the speaker to your Home Network 2 Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference. Connecting Please refer to the documentation for your network device for further instructions. Preparation yy Make sure that wireless network environment using a router is installed at your home. yy Make sure that the speaker and the smart device are connected to the same router.
Connecting 23 Connecting the speaker to your network with a LAN cable Connection overview Broadband service 2 LAN 5. Tap [Finish] to finish making the connection. After finishing, TV connection screen is displayed. Follow the direction on the screen. Connecting Router 4. After typing password, tap [Next].
Connecting 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 5. Connect one end of the LAN cable to the speaker’s LAN port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 Connecting 6.
Connecting 25 (If there is an update) 8. This application is checking the Version of software of your speaker and then shows the version. Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview Broadband service Select [Next] after checking the version information. ,,Note yy You cannot use the speaker without a router. When using the wired router, you can control the speaker with Music Flow PC Software.
Connecting 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 2 Connecting 7. Then select [Next] on the screen. 3. Select the product you want to connect and tap [Next] on the screen. 8.
Connecting 27 9. Then select [Next] on the screen. (If there is an update) 11. This application is checking the Version of software of your speaker and then shows the version. 2 Connecting Select [Next] after checking the version information. ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again. 10. Select [Finish] to complete the connection.
Connecting Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview 2 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service Connecting Router 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 29 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 8. On your iOS device, go to iOS setting -> WiFi setting and select “MusicFlow_Setup” to connect. 2 Connecting 7. Then select [Next] on the screen. ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 9.
Connecting 10. Then select [Next] on the screen. Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. 2 Connecting 11. Then select [Next] on the screen.
Connecting yy You need to turn the speaker’s power off and on again if you restart the router. yy You need to perform a factory set and setup the network connection for speaker, if you install new router. yy If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed differently. 31 Connecting the speakers to your Home Network (Additional) You can enjoy the music with multiple speakers and single smart device you have.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 22. 4. Plug in the desired device, and tap [Next]. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 Connecting 5. Select the product you want to connect and tap [Next] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Select [Wired connection] on the screen.
Connecting 33 7. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. Connecting the additional speaker to your network via the Wi-Fi Setup Method Connection overview Broadband service 2 LAN cable 8. Then select [Next] on the screen. Speaker (Main) 9. Select [Finish] to complete the connection.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 22. 4. Select the product you want to connect and tap [Next] on the screen. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 Connecting 5. Select [Wireless connection] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Press the ADD button on the rear of the speaker Network status LED blinks red. (Add).
Connecting 35 7. Then select the [Next] on the screen. Using the Bridge Bridge (R1) extends a range of use of speakers. Please purchase it separately if you want to use. Use as a root device (wired to the home router) 8. Select [Finish] to complete the connection. When your home router is located too far from any speaker location that is to be connected via wired mode, connect the Bridge (R1) to your home router with LAN cable. Bridge (R1) 1.
Connecting 3. Select the [Add Speaker] on the side menu. 6. Select [Finish] to complete the connection. 4. Select the [Bridge] and tap [Next] on the screen. 7. Connect the speaker to Bridge (R1). Refer to “Connecting the speakers to your Home Network (Additional)” on page 33. 2 Connecting 5. Following the instruction on Music Flow Player app, connect the Bridge (R1) and the router with LAN cable. Wait a moment until Network status LED stops blinking and stays white.
Connecting 37 Use as a wireless extender 3. Select the [Add Speaker] on the side menu. If there is at least one speaker with wired connection to the router When you want to expand Music Flow mesh network coverage, add the Bridge (R1) to your home network. 2 4. Select the Bridge and tap [Next] on the screen. 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. 2. The power LED on the front of Bridge (R1) turns on.
Connecting 6. Follow the instruction on Music Flow Player app and tap [Next] on the screen. Using Media Server for PC Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. Before connecting to PC to play a file, Media server Software should be installed on your PC. 2 Connecting ,,Note Make sure that wireless network environment using a router is installed at your home. 7. Select [Finish] to complete the connection.
Connecting 39 ,,Note yy You might close firewalls and Anti-Virus programs on your PC while installing Music Flow PC Software. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker. yy If you want a full explanation about Music Flow PC Software, click the question marked icon on home menu. yy CPU : Intel® 2.
Connecting System requirements (Macintosh) yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard) yy Macintosh computer with an Intel x86 processor yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone yy Memory: 256 MB RAM 2 Sharing music files Connecting On your computer, you must share the folder contained music files to play them on this speaker. This parts explains the procedure for selecting the shared folders on your computer. 1.
Operating Enjoying the Music with Music Flow Player app 41 Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version.
Operating Edit the Online streaming Service list 1. Launch Music Flow Player app on your smart device. The [Home] appears. Overview of the side menu 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the button. 2. Tap the [EDIT] menu. 3 Operating 3. Side menu appears. yy Select the checkbox of the Online service you want to see on Home. a Home – Displays the Home menu. yy Drag upwards or downwards to change the order of the Online service.
Operating 43 Playing a song 5. Select the desired song. Then selected song is displayed and played. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the button. ,,Note 4. Select the desired album. 3 Operating 3. Side menu appears. Select the [My Phone] on the side menu. If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker.
Operating Managing a playlist Overview of Playback On an album screen, tap the [ ] of the desired song. The pull down menu appears. You can confirm and adjust various information on the playback screen. 3 Operating a Displays the speaker that music plays through. Displays current playing music. b - Repeats the desired contents. Every time you click it, the state changed in the (Repeat One) (Repeat All) (Repeat Off ) order. - Shuffles the music on the list. Music will be played in random order.
Operating 45 Selecting Sound effect Sound Effect Description This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. Standard You can enjoy optimized sound. Music You can enjoy comfortable and natural sound. Cinema You can enjoy more immersive and cinematic surround sound. Flat Provides balanced sound. Boost Boosts the mid-range for sound reinforcement.
Operating Different ways of listening to music There are a number of differing ways of listening to music : Group, Surround and Seamless playbacks. ,,Note 3 If you want to enjoy the group playback and Surround playback, it is recommended that at least one speaker is connected by LAN cable. To change speaker connection setting when all the speaker have been already connected wirelessly, reset all the speaker and connect again after connecting the one speaker of them.
Operating 47 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. Surround Sound Mode (Home Cinema Mode) Simply add a LG MUSICflow sound bar to your network and synchronize it with your LG MUSICflow speakers to enjoy a home cinema system experience. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback. 2. Connected speakers appear. Select the [ ] on the speaker.
Operating 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. ,,Note yy It is recommended to set the surround speakers to same models. yy The weak signal because of the long distance between speakers or wireless router and signal interference may cause abnormal playback. yy Depending on your wireless environment, the grouping may be broken.
Operating 49 Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker To use Seamless playback, you have to set up Auto Music Play to On. (Page 54) ,,Note yy It is not supported when you go out of the house with your smart device. yy Wi-Fi function on smart device must be turned on. yy If the source is Portable In and Bluetooth, seamless play is not supported.
Operating Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. 3 yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. a General – Sets for easier use of the speaker. b Speakers – Sets connected speaker.
Operating [Speakers] Menu a Rename – Renames the speaker. You can adjust speakers connected to your network. b 51 Speaker LED – Turns on or off speaker’s LED indicator. c IP Info. - Shows the IP address of the speaker. Compressed sound transmission – Adjusts d the compression of audio source according to network status. DRC – Turns on or off DRC function. (Page 57) f Night – Turns on or off Night Mode function. (Page 59) g Auto Volume On/Off – Turns on or off Auto Volume function.
Operating [Alarms/Sleep Timer] Menu [Account management] Menu Turns on and off the speaker at a designated time. Manages online streaming service. Alarms [Time Zone] Menu Speaker will let you know when it is time. Deletes selected alarm. Adds new alarm. Sleep Timer Sets a time to automatically turn off the speaker. 3 1. Select the speaker to set timer on [Sleep Timer] in the [Alarms/Sleep Timer] menu. Operating 2. Set the desired timer on selected speaker.
Operating 53 [Advanced Settings] Menu Mesh Network Channel If normal playback or group playback is not smooth using multiple speakers including wireless speaker connection, changed the mesh network channel to improve network speed. 1. Select the [Settings] -> [Advanced Settings] option. ,,Note yy The speaker is disconnected temporarily during the channel changing. yy If you changed the channel when the speaker turned off, turn on and add it again.
Operating Auto Music Play Sensitivity Settings You can easily change the rendering device from your smart device or a speaker to another speaker by approaching your smart device to the desired speaker. Sets the operating distance of Auto Music Play between the speaker and your smart device to adjust sensitivity of Bluetooth(BLE). yy Your smart device should support bluetooth (BLE). yy This function is subject to the smart device capability and the Wi-Fi network status.
Operating 55 [Chromecast] Menu Learn how to cast Shows how to use Chromecast. Chromecast enabled apps Shows available apps on Chromecast. Cast Groups Select [Learn about Cast Groups] or [How to cast to a group] to show the selected information. ,,Note Chromecast built-in open legal documents Select [Google Terms of Service], [Google Privacy Policy] or [Open source licenses] to show the selected information. [Version Info.] Menu Updates the speaker to the latest version. App version info.
Operating Using a Bluetooth Wireless Technology 1. Select the Bluetooth function by using FUNC on the remote control or F on the unit until the function is selected. Appears “BT” and then “BT READY” in display window. About Bluetooth 2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.
Operating 57 ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yy This unit supports Bluetooth auto pairing.
Operating Turn off the sound temporarily Auto power down Press This unit will turn itself off to save electric consumption when the main unit is not connected to an external device and is not used for 20 minutes. (Mute) to mute your unit. You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window. To cancel it, press (Mute) again on the remote control or change the volume level.
Operating 59 AUTO POWER On/Off This unit automatically turns on and off by an input source : Optical. When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the optical function. You can hear the sound from your device. This function turns on or off each time you press AUTO POWER.
Operating Standby mode The speaker switches to the standby mode if there is no music playback or no button operation. If the Bluetooth standby mode is set to ON, the speaker switches Bluetooth standby mode when is turned off. Standby mode When you turn on the main unit in the Bluetooth standby mode, Bluetooth and LG TV are able to connect even if network is not connected. Option 1.
Troubleshooting 61 Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. The power does not turn on.
Troubleshooting Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting 63 Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly.
Appendix File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.m4a”, “.aac”, “.ogg”, “.wav” Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Appendix 65 Specifications General Power requirements Refer to the main label on the unit 50 W Power consumption Networked standby : 6.0 W (If all network ports are activated.) Dimensions (W x H x D) (1100 x 106 x 135) mm (without Foot) Net Weight (Approx.) 8.2 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Input/Output OPT. IN 3 V (p-p), Optical jack x 2 PORTABLE IN 0.5 Vrms (3.
Appendix System ETHERNET (LAN) port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.11a/b/g/n Wi-Fi networks. Bluetooth Version 4.0 Codec SBC yy Designs and specifications are subject to change without prior notice.
Appendix 67 Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix TERMS OF USE or any part of the Services where we consider it reasonably necessary for technical, operational, security, legal or regulatory reasons. These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”).
Appendix 69 may be subject to the provider’s own terms and conditions and privacy policy. We encourage you to read these documents, although we are not responsible for their content. We do not accept any responsibility for apps, services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability.
Appendix If you have any questions or comments about these Terms of Use please contact www.lg.com. These Terms of Use may be updated by LGE from time to time. If we make a material change to our Terms of Use, we will update you via your LG Software or other means. OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
