User Guide

14 | INTRODUCTION
Single Zone Art Cool Premier Owner’s Manual
Due to our policy of continuous product innovation, some specications may change without notication.
BASIC FUNCTIONS
Timer Setting Functionality
Setting the Current Time
Setting the Timer
Setting Air Conditioner On Time
Setting Air Conditioner Off Time
Cancelling Timer Settings
1. Press .
•To cancel all timer settings, press once more.
Setting Sleep Mode
The Art Cool Premier unit can be programmed through timer settings to turn on and off at set times during the day and night. This functional-
ity allows you to save energy and utilize the air conditioner more efficiently.
1. Press and hold for longer than 3 seconds to initiate setting
functionality.
•The AM/PM icon will flicker at the bottom of the display screen.
2. Press one of the up and down buttons, to scroll and
then select the minutes (hours will scroll).
3. Press when done to exit the setting mode.
1. Press the On button under the Timer area of the
remote controller.
•An “ON” icon will flicker to the right of the timer display on the
display screen.
2. Press one of the up or down buttons to select the
minutes (hours will scroll).
3. Press when done to exit the setting mode.
1. Press the OFF button under the Timer area of the
remote controller.
•An “OFF” icon will flicker to the right of the timer display on the
display screen.
2. Press one of the up or down buttons to select the
minutes (hours will scroll).
3. Press when done to exit the setting mode.
The sleep mode is used to turn off the air conditioner at a certain set
time automatically so that you don’t have to turn it off manually. It is
a “countdown” timer and can be set for up to 7 hours ahead of the
current time.
1. Press to turn on the power.
2. Press the Sleep button to initiate sleep mode settings.
3. Press one of the up or down buttons to select the
number of hours.
4. Press when done to exit the setting mode.
• appears on the display screen to signify unit has been set
to sleep mode.
•Your display screen might appear slightly different depending on
your model.
In the Cooling and Dehumidifying Modes, the temperature increases by
1.8 °F (1 °C) after 30 minutes and by a further 1.8 °F (1 °C) after another
30 minutes for a more comfortable sleep environment. The temperature
increases up to 3.6 °F (2 °C) from the preset temperature.