LUU189HV Installation Manual

10
WIRING CONNECTION
ENGLISH
Connecting the cable to Outdoor Unit
- Remove the side panel for wiring connection.
- Use the cord clamp to fix the cord.
- Earthing work
Connect the cable of diameter more to the earthing terminal provided in the control box and do
earthing.
When connecting main power cable,
make sure the rubber bushes are
properly used in knock-out holes after
removing the Insulation.
Insulation
Main
Terminal
Block
Cord clamp
Cord clamp
CAUTION
• The circuit diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that not to be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
!
CAUTION
• The Power cord connected to the unit should be selected according to the following
specifications.
!