Owner's Manual

23
WDR/BLC setting
Use WDR/BLC option to set the options for BLC or
WDR camera.
1. Select [WDR/BLC] option on the [EXPOSURE]
menu.
2. Use [N] or [F] button to select a mode then press
[M].
WDR: Set the WDR limit.
WDR LEVEL: LOW y MIDDLE y HIGH
BLC: Set the BLC limit.
BLC LEVEL: LOW y MIDDLE y HIGH
•
-
•
-
HSBLC: Use for adjusting brightness the
specific area of picture. The HSBLC mode is
automatically activated only in low illuminance
scene.
AREA SETTING: Use [N] or [F] button to
select a area then use [T] or [W] button to
select a ON or OFF. Press [M] to exit the
area setting menu.
GRAY SCALE: Use [N] or [F] button to
select a gray scale.
(GRAYyD.GRAYyBLACK).
HS LEVEL: Use [N] or [F] button to select a
bright level. (5 level)
MASK STATE: Use [N] or [F] button to
select [ON] or [OFF].
If you set the MASK STATE to ON, the
mask function is activate only when the
HSBLC is activated by auto mode.
OFF: Not used.
•
-
-
-
-
•
Exposure settings