Owner's Manual

14
LEFT Button E5, 86, ID, 12, 80, C.S.
Right Button E5, 86, ID, 12, 90, C.S.
Up Button E5, 86, ID, 11, 80, C.S.
Down Button E5, 86, ID, 11, 90, C.S.
Menu Button E5, 86, ID, 41, 01, C.S.
Connecting Alarm Device
Alarm terminals are used to connect the alarm (relay)
devices such as sensors, door switches, etc.
Connect the alarm (relay) device to the alarm (relay) output
terminal. Alarm signal outputs at an event occurrence.
Alarm (Relay)
Device
Contact Ratings
• Maximum load current is ±130
mA.
• Do not connect any
system or device that has over
40 Vp-p bias voltage on the
contact terminal.
Equivalent
Diagram
Note:
Use a relay unit if the voltage or current of the
connected device exceeds the ratings.
Connections