LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM Page 1 Dynamic Controller Owner's Manual MODEL Before : LCC-K1000 installing and using the product, please read manual carefully and retain for future reference.
8/17/05 LCC-K1000_AA3RMLG_ENG 1:44 PM 2 Page Regulatory Notices For U.S.A This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER environment.
8/17/05 LCC-K1000_AA3RMLG_ENG 1:44 PM Page 3 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL. AND CAUTION: THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM 4 Page Introduction Contents Introduction............................4-7 Contents................................4 AboutDynamicController.................5 Features..............................5 IdentificationoftheController. . . . . . . . . . . .6-7 . . . . . . . . . . . . . . . . Connections.............................8 RemotePTZReset....................21 Precautions..............................8 FactoryReset..................
LCC-K1000_AA3RMLG_ENG About 8/17/05 1:44 PM Page 5 Dynamic Controller This controller is the brand of Dome Camera Control Keyboard of LG in a surveillance system.You can operate this system very easily and conveniently because of design structure based on biotechnology and various functions for users. In addition, the controller can control using the whole functions of the LG Dome Camera such as zoom, focus and Pan/Tilt heads.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM Page 6 Identification of the Controller 123 4 567 q;qa qs qd qfqgqh qj 89 qkqlw; wa 6 ws wd wf
8/17/05 LCC-K1000_AA3RMLG_ENG 1 troller's data RS-485 1CH a camera connected to the 7 RS-485 2CH camera connected to qf connected to details, page 19. qh previous qj NUM Button Press this button to on the to numeric change entering input, and an and Arrow option These buttons set numbers or the Controller's 7 8 in the are for (left/right/up/down) menu.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM Page 8 Connections RS-485 Connection 5: TRX+ Camera 1 6: TRX- RJ11 Cable Camera 2 (Supplied) DC 12V cable for Controller RS-485 Connection Precautions ? The connections should be made service personnel or system installers in dance with all local codes. ? DC 12V can by qualified be used. accor- Use the cable that is described below for RS-485 site communication.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 Setup Menu Overview The menu main menus are Page 9 Menu Setup Setup PM has several submenus: System Setup, Preset Data Load, and Communication. All of these further divided into submenus.
LCC-K1000_AA3RMLG_ENG 8/17/05 Key Functions Set button: To Up a on display SEL button: To execute eters. To enter 1:44 (CLEAR) 10 Page the Set the main menu. button: Removes menu. number a (Login) Before select modes and paramsubmenu for the selected item. previous Start Operation Up or Back button: To return to the CLR PM on starting operation, user authentication by the password is required. (Refer to page 21 for details on the setting of password.) 1.
8/17/05 LCC-K1000_AA3RMLG_ENG Communication This is setting between the 1:44 Page 11 Protocol Settings to establish required PM a connection system units and system controller. List of the communication settings Setting This item lets you set nication.
8/17/05 LCC-K1000_AA3RMLG_ENG Preset 1:44 PM 12 Page Press NUM button then enter 9. Settings (holding time) (1-255). Then The position and its number Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers. By entering the to the cameras position numbers, preset positions. you a [Park Time] press SEL. are memorized for later recall. 10. Repeat steps 4-9 to add additional position.
8/17/05 LCC-K1000_AA3RMLG_ENG To tour the You can 1:44 PM 13 Page To group the preset positions tour all You preset positions. 1. Press the Set Up button then select the [PRESET] icon. PRESET are can group using preset positions that already. A maximum of 9 group is create registered preset positions a available. 1. Press the Set PTZ Up button then select the [PRESET] icon. PRESET PTZ 2. Press SEL. The sub 3.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM 14 Page To tour the group You can To clear the tour the group that is 1. Press the Set Up registered already. button then select the [PRESET] icon. You can delete preset position memorized a 1. Press the Set Up preset position. button then select the [PRESET] icon. PRESET PRESET PTZ PTZ 2. Press SEL. The sub menu will appear for [PRESET] setting. 2. Press SEL. The sub 3. Select then press SEL. [Group Tour] option The sub menu 3.
LCC-K1000_AA3RMLG_ENG To clear all You can 8/17/05 1:44 PM Page To clear preset position delete all memorized 1. Press the Set Up preset position. button then select the [PRESET] icon. You can a group delete memorized group. a 1. Press the Set Up button then select the [PRESET] icon. PRESET The sub PTZ 2. Press SEL. menu [Clear The sub PRESET PTZ 2. Press SEL. 3. Select 15 will appear for All menu [PRESET] setting. Preset] option then press SEL. will appear.
8/17/05 LCC-K1000_AA3RMLG_ENG To set Alarm You can 1:44 PM To set Alarm Input set alarm input mode, alarm duration time. Preset numbers 1 to 8 alarm 16 Page are You linked to If alarm input 1 comes in, the camera turns to preset position 1, and to other positions according to alarm input 2 to 8. inputs 1 to 8 index, and 1. Press the Set respectively. Up button then select the [PRESET] icon. input sends output signals the on Alarm output numbers inputs 1 to 4 3.
8/17/05 LCC-K1000_AA3RMLG_ENG Auto Pan Setup 1:44 PM 17 Page To activate auto pan and Activation 1. Press the Set You will set up and activate the auto pan function. The camera can pan among the points you will set. Note: Refer to the for details operating instructions of PANNING] camera To set the PANNING] button then select the Up [AUTO 2. Press SEL. icon. The sub AUTO PANNING PTZ menu will appear for [AUTO PANNING] setting. 3.
8/17/05 LCC-K1000_AA3RMLG_ENG Pattern You will Setup the perform 1:44 PM 18 Page and Activation 7. Perform desired the play. 1. Press the Set TERN] ? on ? pattern Up [PAT- icon. PATTERN PTZ recording Panning/Tilting/Zoom control (joystick) Zoom control (In/Out buttons) or Back button if you cancel the recording during recording button then select the for the pattern. Note: Press CLR To record the operations by moving joystick or pressing In/Out buttons.
8/17/05 LCC-K1000_AA3RMLG_ENG 1:44 PM 19 Page To Privacy Setup This is used for setting masking unwanted zones, hiding them from display on the monitor screen. to 8 Up zones can vided for be Submenus registered. number selection and zone are parameter display disappear privacy or 1. Press the Set Up zone button then select the [PRIVACY icon. ZONE] pro- PRIVACY ZONE set- PTZ ting. To register a new 1. Press the Set Up privacy zone button then select the [PRIVACY 2.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM 20 Page Configuration Settings In this menu, you ed. can customize the settings provid- Focus Speed Setting You select can MIDDLE, or a shutter speed LOW, HIGH Manual Focus Operation from among Speed Home Position PTZ 1. Press the Set Up button then [CONFIGURATION] icon. Auto select the CONFIGURATION PTZ Key Lock [vV:bB] LOW Speed MIDDLE Speed HIGH Speed PTZ [vV] 2. Press SEL.
8/17/05 LCC-K1000_AA3RMLG_ENG Auto Lock Key 1:44 PM Page Remote PTZ Reset Setting The keys on the controller is locked when there is operation for selected duration on the [Auto Key Lock] option. To release the Key Lock mode, you need to enter the password. NONE: Auto Lock function is disable. After 1 min.: The keys on the controller is operation for 1 minutes. locked keys on the controller is operation for 3 minutes. locked no After 3 min.
8/17/05 LCC-K1000_AA3RMLG_ENG 1:44 PM Page 22 Lens Control Camera Control The Function Camera control functions functions following provided with are available with cameras controllable lens. operable. are It is necessary to set up the camera before using the camera control functions. For further information, refer to the Operating combination Camera camera. Setup menu Instructions for the You respective also set it up from the operating the system.
LCC-K1000_AA3RMLG_ENG 8/17/05 1:44 PM Page 23 Reference Specifications Communication Signal RS-485 Connector RJ11 Baud Rate 1,200 / 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 112,500 bps Joy-Stick Type 3-Axis Control 256 Camera ID / Protocol Selection / Alarm Control Pan / Tilt / Zoom / Iris Focus 128 Positions Preset 8 Positions Auto 4 Pattern Privacy Update RS-232C Total Number 44 Key Masking (8 zones) Password 6 Digits Display 4 Gray Graphic / Operation Temp.
LCC-K1000_AA3RMLG_ENG P/NO : 8/17/05 3834RS0075Z 1:44 PM Page 24