ENGLISH РУССКИЙ OWNER'S MANUAL CAR CD/MP3/WMA Receiver Please read this manual carefully before operating your set and retain it for future reference.
Table of Contents 3 4 5 Safety Note Front Panel Remote Control Battery installation 6 About detachable control panel Attaching the control panel Detaching the control panel 7 Installation Basic installation Removing the existing receiver unit ISO-DIN installation 8 Connection 9-10 Basic operation Mute Using the EQ Using XDSS+(Extreme Dynamic Sound System) Checking the clock Turning off the display light Resetting the unit Adjusting general settings 10-11 Listening to a CD Pausing or restarting CD playback
Safety Note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Front Panel a [SRC] Selects function sources. [• OFF] Power on/off. b [DISP] • Press it, you can check the clock time. • Press and hold it, you can turn off the display light. c [BX] Plays or pauses playback d Volume knob • Adjusts volume level. • Confirms the settings. • Checks tracks or files in CD mode or preset stations in TUNER mode. e [BAND] Selects a band. [• TA] Traffic Announcement (OPTIONAL) Searches stations that have TA/TP information.
Remote Control Battery Installation 1 a b c d e f g Adjusts volume level. h [m M] Skip / Search / Seek / Tune [ ] Returns to the previous step. [v V] • List up/ down • Adjusts settings. • Moves 10 MP3/WMA tracks backward or forward if there is no folder or one folder on a CD. • Moves to the previous or next folder if there are more than 2 folders on a CD. [ENTER/LIST] • Confirms the settings. • Checks tracks or files in CD mode or preset stations in TUNER mode. [SRC] Selects function sources.
About detachable control panel Attaching the control panel Detaching the control panel 1 Attach part A of the control panel to part B of the unit. 1 Press the [OPEN] to open the control panel. 2 Attach part C of the control panel to part D of the unit while pushing the control panel to left. Close the control panel. 2 Push the control panel to right. 3 4 Pull the control panel out of the unit. Put the detached control panel into the protective case.
Installation ISO-DIN Installation Basic Installation 1 Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Bend the claws according to the thickness of the dashboard 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve. Control panel 2 1 4 5 6 Control panel 3 3 2 4 5 6 Slide the unit into the ISO-DIN frame.
Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. To Audio out (OPTIONAL) Rear Left (Sub-woofer Left) Rear Right (Sub-woofer Right) *Sub-woofer is optional.
Turning off the display light Basic Operation . 1. Turn the unit on. 2. Select a source. 3. Adjust the volume. 4. Turn the unit off. ON PLAYER ON REMOTE Any key - SRC SRC Rotate the volume knob Press and hold OFF VOLUME 1. Press and hold DISP. 2. Press and hold it again to turn it on. Note Under the light-off condition, press any keys, the light is turned on and then off automatically if you don’t press it within a few seconds.
For Light setting You can adjust the light effects by adjusting LED, DIM, or DIM L. LED LED COL1/ COL2/ AUTO: You can change the LED window color. DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO, the dimmer operates according to the car dimmer setting. DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2) Listening to a CD ON PLAYER OPEN 1. Open the front panel.
Playing back tracks/files in a way you want On the Unit 1. Press FUNC. 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option. 4. Press the volume knob to confirm the setting. If you want to return to the previous step, press . On the Remote Control 1. Press INT/ RPT/ SHF. 2. Press it again to cancel. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet.
Adjusting TUNER settings Listening to the radio ON PLAYER ON REMOTE SRC SRC 2. Select a band. BAND BAND 3. Auto seek. Manual seek. b?-/+?B Press and hold b?-/+?B m/M Press and hold m/M 1. Select a source to tuner. Listening to the radio - more you can do Storing desired frequencies manually 1 Press BAND to select a desired band you want to store. 2. Press and hold b?- or +?B on the unit or m or M on the remote control until the beep sound is heard. 3.
REG (Region) ON/ OFF (OPTIONAL) REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.
Recording to USB from CD or FM tuner Using an USB device ON PLAYER ON REMOTE 1. Open the USB cover. - - 2. Connect the USB device. - - 3. Adjust the volume. Rotate the volume knob VOLUME Using an USB device - more you can do Moving to another drive When connecting this unit to multi reader, press BAND (BAND/ DRV on remote control) to go to the next drive. Each time you press the button, the driver modes changes. 1. Open the USB cover and connect it to the unit. 2. Select CD or FM tuner. 3.
Listening to music by connecting iPod (Only in LCF800IN/ LCF800IR) You can enjoy iPod-stored music on the unit by connecting it to the USB connector using the appropriate cable. Playing back files in a way you want On the Unit 1. Press FUNC. 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option. 4. Press the volume knob to confirm the setting. If you want to return to the previous step, press . On the Remote Control 1. Press RPT/ SHF. 2.
Troubleshooting Symptom General Power doesn’t turn on / The unit doesn’t operate. Cause Leads and connectors are not properly. The fuse is blown. CD Radio Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. There’s audio skipping. This unit is not firmly secured. The playback is not possible. The disc is dirty. The loaded disc is of a type this unit cannot play.
Specifications General Output Power Power Source Speaker impedance Ground System Dimensions (W x H x D) Net Weight Tuner FM Frequency Range S/N Ratio Distortion Usable Sensitivity AM (MW) Frequency Range S/N Ratio Distortion Usable Sensitivity CD Frequency Response S/N Ratio Distortion Channel Separation (1 kHz) AUX Frequency Response S/N Ratio Distortion Channel Separation (1 kHz) Max Input Level (1 kHz) USB Version Line OUT Frequency Response Output Voltage Subwoofer (optional) Frequency Response Output V
