OWNER’S MANUAL CAR CD/MP3/WMA Receiver Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 1 2.
Table of Contents Table of Contents 15 21 21 – Playing back tracks/ files in a way you want Listening to music from an external device – Preventing radical changes in volume as switching sources Listening to the radio – Storing desired frequencies manually – Listening to a preset station – Adjusting TUNER settings Using an USB device – Moving to another drive – Quick Search of a desired file – Playable USB device Requirement – Recording to USB from CD or FM tuner Listening to music by connecting iPod
Getting Started 5 Front panel [LCS510IR/ LCS510UR] a b c d e f g h i 1 Getting Started ͶͿ΅Ͷ͠ ͑͑͑͑͑ͽͺ΄΅ j k l m n o p q r s t a B Ejects a disc. j R Recording to USB. b SRC/ • OFF • When pressed, selects function sources. • When pressed and held, powers unit on or off. k ` Activates setting menu. c N Plays and pauses playback. Temporarily stops the sound. d Volume knob • Adjusts volume level. • Confirms the settings. • Checks tracks, files or preset stations.
Getting Started Front panel [LCF610IR] a b 1 c d f e g h Getting Started ͶͿ΅Ͷ͠ ͑͑͑͑͑ͽͺ΄΅ i j k l m n a SRC/ • OFF • When pressed, selects function sources. • When pressed and held, powers unit on or off. b N Plays and pauses playback. Temporarily stops the sound. c Volume knob • Adjusts volume level. • Confirms the settings. • Checks tracks, files or preset stations. d F In each mode, sets playback items. e BAND Selects a band in Tuner mode.
Getting Started Remote control 7 i DISP • Press it, you can check the clock time. • Press and hold it, you can turn on/off the display window and the light of LED buttons. 1 k INT Intro scan l Numeric buttons (1 - 6) Selects a numbered preset station in TUNER. Battery Installation a SRC/ • OFF • When pressed, selects function sources. • When pressed and held, powers unit off. b FUNC When pressed, sets playback items in each mode. • MENU When pressed and held, activates setting menu.
Connecting About detachable control panel [LCS510IR/ LCS510UR] 2 Attaching the control panel Detaching the control panel 1. Press the 6 to open the control panel. 2. Push the control panel to right. Connecting 1. Align the left side of the panel with the stopper. 2. Push the right side of panel into the unit until it clicks. 3. Pull the control panel out of the unit. 4. Put the detached control panel into the protective case.
Connecting About detachable control panel [LCF610IR] 9 Detaching the control panel 1. Press the OPEN to open the control panel. Attaching the control panel 2. Push the control panel to left. i h 2. Attach part C of the control panel to part D of the unit while pushing the control panel to left. 3. Pull the control panel out of the unit. 4. Put the detached control panel into the protective case. 3. Close the control panel.
Connecting Installation ISO-DIN Installation Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 2 Connecting Bend the claws according to the thickness of the dashboard. Control panel 1. Slide the unit into the ISO-DIN frame. 2. Fit screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate. Control panel 1.
Connecting 11 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Wired remote input (Black): Hard-wired control adapter can be connected.
Operating Operation Checking the clock 1. Press DISP to check the clock. 2. Press it again to remove it. Basic operations 1. Turn the unit on by pressing any key on the unit. Turning off the display light 2. Select a source by pressing SRC. 2. Press and hold it again to turn it on. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W/S on the remote control. , Note 3 If a source is not connected to the unit, the source is not recognized.
Operating Adjusting the general settings For [LIGHT] setting You can adjust [SOUND], [LIGHT] and [OTHER] settings. You can adjust the light effects by adjusting LED, DIM, or DIM L. On the unit LED COL1/ COL2/ AUTO: You can change the LED window color. 1. Press `. 2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it. DIM (Dimmer) OFF/ ON/ AUTO: You can change the brightness of the display window during the power-on status. Settings Description 4.
Operating For [OTHER] setting AUX (Auxiliary) ON/ OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source. SW (Subwoofer) OFF/ SW 55 Hz/ SW 85 Hz/ SW 120 Hz You can enable the subwoofer. SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz.
Operating Skipping to another track/ file Press A/ D on the unit. Or press c/v on remote control. Or 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it. Or press w / s and press ENTER on the remote control. 3. Rotate the volume knob on the unit to select a desired track/ file and press it. Or press w / s and press ENTER on the remote control.
Operating , Note : The icon is displayed during MP3/WMA playback. MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 kHz to 48 kHz (MP3) 22.05 kHz to 48 kHz (WMA). 2. Bit rate / within 8 kbps to 320 kbps (include VBR) (MP3) 32 kbps to 320 kbps (WMA). 3. CD-R/CD-RW file system should be "ISO 9660". 3 Operating 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example "Direct-CD" etc.
Operating Listening to the radio Listening to a preset station 1. Press SRC repeatedly to select a source to TUNER. 2. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Press BAND repeatedly to select a desired band. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 17 1. Press BAND repeatedly to select a desired band. 3. For manual search, press and hold A/ D on the unit until “MANUAL“ is displayed.
Operating Adjusting TUNER settings On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option and press it. 4. If you want to return to the previous step, press . On the Remote Control 3 1. Press FUNC/ • MENU. 2. Press w / s to select an item and press ENTER. Operating 3. Press w / s to set the option and press ENTER. 4. If you want to return to the previous step, press .
Operating 19 Using an USB device When you connect a partitioned USB device into the unit, only the first partition is recognized on it. 1. Open the USB cover. Some USB device may not work with this unit. 2. Connect the USB device. Digital camera and mobile phone are not supported. 3. Press SRC repeatedly to select a source to USB. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W/S on the remote control. USB Port of the unit cannot be connected to PC.
Operating Listening to music by connecting iPod/ iPhone [LCS510IR/ LCF610IR] Playing back tracks/ files in a way you want You can enjoy iPod/ iPhone-stored music on the unit by connecting it to the USB connector using the appropriate cable. 3. Rotate the volume knob to select the option. On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 4. Press the volume knob to set the option. If you want to return to the previous step, press . On the Remote Control 3 1.
Operating 21 Playing back files by music menus You can check files by music menus and play it back. The music menus are as follows. PLAYLISTS / ARTISTS / ALBUMS / GENRES / SONGS / COMPOSER / AUDIO BOOK / PODCAST / ... 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a music menu and press it. Or press w / s on the remote control. 4. Press the volume knob on the unit to confirm the setting. Or press ENTER on the remote control.
Troubleshooting Troubleshooting Symptoms Cause Solution Power doesn't turned on. Leads and connectors are not properly. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are causing the built in microprocessor to operate incorrectly. Turn the unit off and then on again. No sound is heard.
Appendix 23 Specifications USB Version: USB 1.1 or USB 2.0 Full Speed General Bus Power Supply (USB): DC 5V Output Power: 53 W x 4 CH (Max.) Line OUT (OPTIONAL) Power Source: DC 12 V Speaker impedance: 4 Ω 1A Frequency Response: 20 Hz to 20 kHz Output Voltage: 2 V (Max.) Ground System: Negative Dimensions (W x H x D): 178 x 50 x169 mm (without Control Panel) Subwoofer (OPTIONAL) Net Weight: 1.37 kg Output Voltage: 2 V (Max.