Owner’s Manual

16 OPERATION
Using Wireless Remote
Control
Operating with the Wireless
Remote Control
Point the wireless remote control towards the
signal receiver in front of the appliance to operate
it.
Type 1
Type 2
NOTE
• The wireless remote control may operate other
electronic devices if it is directed towards them.
Make sure to point the wireless remote control
towards the appliance signal receiver.
Cooling, Auto, Dehumidification,
Heating, Fan Mode
You can change the operating mode when the
appliance is turned on.
1 Turn the appliance on.
2 Press the Mode button repeatedly to select
the desired mode.
3 Press the a or b button to set the desired
temperature.
• Cooling Mode: Set the temperature from 64
℉ (18 ℃) to 86 ℉ (30 ℃).
• Heating Mode: Set the temperature from 60
℉ (16 ℃) to 86 ℉ (30 ℃).
• Auto Mode (Cooling only): Each press
changes the temperature as follows: -2
& -
1
& 0 & 1 & 2
• Auto Mode (Heat pump): Set the
temperature from 64 ℉ (18 ℃) to 86 ℉ (30
℃).
• Dehumidification, Fan Mode: There is no
temperature control.
Jet Mode
Use this mode to change the room temperature
more quickly.
1 Turn the appliance on.
2 Press the Mode button repeatedly to select
the desired mode.
•The Jet mode is available with Cooling,
Heating and Dehumidification modes.
Icon Description
Cooling Mode
Cool air blows from the air outlets.
Auto Mode
The product adjusts the airflow
automatically.
Dehumidification Mode
This function removes moisture in
indoor air.
Heating Mode
Warm air blows from the air outlets.
Fan Mode
This function circulates the air
without heating or cooling it.