Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATION
- Before Use
- Product Overview
- Preparing before Operation
- Wireless Remote Control Overview
- Using Wireless Remote Control
- Operating with the Wireless Remote Control
- Cooling, Auto, Dehumidification, Heating, Fan Mode
- Jet Mode
- Adjusting the Fan Speed
- Adjusting the Airflow Direction
- Timer Setting
- Special Functions
- Checking Room Temperature
- How to Use Air Purification (On Some Models)
- Checking Overall Cleanliness (On Some Models)
- Air Quality Level Color Setting (On Some Models)
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
19OPERATION
ENGLISH
2 Press the c or d button to set the desired
time.
3 Press the Set/Clear button.
• Turn the air conditioner off. It will turn on
automatically at the set time.
Off Timer
1 Press the Off button while the air conditioner
is operating.
• The icon below flashes at the bottom of the
display screen.
2 Press the c or d button to set the desired
time.
3 Press the Set/Clear button.
• The air conditioner operates until the set
time and then turns off automatically.
Special Functions
Auto Clean (On Some Models)
In Cooling and Dehumidification modes,
moisture is generated inside the indoor unit. Use
this function to reduce that moisture.
1 Turn the appliance on.
2 Press the Func. (Function) button repeatedly
to select the Auto Clean function.
3 Press the Set/Clear button to set the function.
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the appliance, the fan continues to
run for 30 minutes to clean the inside of the
indoor unit.