Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATION
- Before Use
- Product Overview
- Preparing before Operation
- Wireless Remote Control Overview
- Using Wireless Remote Control
- Operating with the Wireless Remote Control
- Cooling, Auto, Dehumidification, Heating, Fan Mode
- Jet Mode
- Adjusting the Fan Speed
- Adjusting the Airflow Direction
- Timer Setting
- Special Functions
- Checking Room Temperature
- How to Use Air Purification (On Some Models)
- Checking Overall Cleanliness (On Some Models)
- Air Quality Level Color Setting (On Some Models)
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
32 MAINTENANCE
NOTE
• The dust sensor shown below does not require
cleaning.
Tips for Maintenance
Before Long Periods of Disuse
1 Operate the air conditioner in the Fan mode
for 2 to 3 hours.
• This will dry out the internal mechanisms.
2 Turn off the breaker.
CAUTION
• Turn off the breaker when the air conditioner is
not going to be used for a long period of time.
After Long Periods of Disuse
1 Clean the air filter and install it in the indoor
unit.
2 Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
3 Check that the ground wire is connected
correctly.
• The ground wire may be connected to the
side of the indoor unit.