Owner’s Manual

10
OPERATION
Operation Indication Lamps
Type 1
On/Off
Lights up during the system
operation.
Filter Sign
Lights up after 2 400
hours from the time of first
operating unit.
Timer
Lights up during Timer
operation.
Defrost Mode
Lights up during Defrost
Mode or Hot Start operation.
(Heat pump model only)
•
Forced
Operation
Button
To operate the unit when the
remote control can’t be used
for any reason.
Type 2
Description Lamp Color
Cooling mode Green
Heating mode Green
Time to clean filter in cooling/heating
mode
Yellowish
Green
Time to clean filter when product is not
opeating
Orange
Hot start or defrost mode before
starting heating mode
Green
When reservation set on
Yellowish
Green
Lamp
Forced Operation Button
※ The Clean Filter indicator lamp does not light up
starting from the corresponding product manufacturing
number (after Oct. 2021).
NOTE
• Hot start operation
− Stops the indoor fan in the heating operation for a
few minutes to prevent cold air from blowing out
from unit.
• In defrost mode, the unit stops the heating operation
for a few minutes to remove ice formations from the
heat exchanger coils in order to maintain efficiency.
Wireless Remote Control
Inserting Batteries
1
Remove the battery cover by pulling it according to
the arrow direction.
2
Insert new batteries making sure that the (+) and
(-) of battery are installed correctly. (Battery Size =
AAA).
3
Reattach the cover by sliding it back into position.
NOTE
• When using or replacing batteries, make sure that
they are both the same type.
• If the system is not going to be used for a long time,
remove the batteries to save their working life.
• If the display screen of the remote controller starts,
fading replace both of the batteries.
Installing the Remote Control
Holder
1
Choose a suitable place where its safe & easy to
reach.
2
Fix the firmly to the wall with the supplied screws.
3
Slide the remote controller inside the holder.
NOTE
• The remote controller should never be exposed to
direct sunlight.
• The signal transmitter & receiver should always be
clean for proper communication. Use a soft cloth to
clean them.
• If other appliances are accidentally affected by the
remote controller, change their position or consult
your serviceman.