Owner’s Manual

ENGLISH
FRANÇAIS ESPAÑOL
11
OPERATION
Using Wireless Remote Control
You can operate the air conditioner more conveniently with the remote control.
Button
Display
Screen
Description
- Used to turn on/off the unit.
AIR PURIFY Used to start or stop the air purification function.
PLASMA Used to start or stop the plasma-purification function.
VANE ANGLE Used to set each vane angle.
AIR FLOW Used to set airflow.
Used to select the room temperature.
MODE - Used to select the operation mode.
JET MODE
To change room temperature quickly.
JET COOL
FAN SPEED - To adjust the fan speed.
FUNC. - Used to set or clear additional function.
To adjust the air flow direction vertically or horizontally.
ROOM TEMP Used to check the room temperature.
SLEEP Used to set the time for the sleep function.
ON - Used to set the start time.
OFF - Used to set the stop time.
-
Used to set the timer. Used to adjust the brightness.
Used to check the room temperature. (If it is not time adjust mode)
SET/CLEAR - Used to set/clear the timer. Used to set the current time. (hold button for 3 seconds)
RESET
- To initialize the remote control settings.
NOTE
• Depending on the product type, some functions may not be available and displayed.
• Some products don’t receive the wired signals.
• When using the simultaneous operation system, the system will operate approximately 1 - 2 minutes after pressing
the remote controller button.
• The displayed temperature can be different from the actual room temperature if the remote controller is installed
somewhere exposed to direct sunlight or is nearby a heat source.
• Depending on the product, wireless and wired remote control are optional or basic.
• Heating Mode is not available for Cooling only Models.
• Buttons may be changed according to the type of model.