Owner’s Manual

20
OPERATION
Smart Clean (Optional)
The Smart Clean function can be used by setting to
manual or automatic.
• is displayed on the display screen.
Auto Smart Clean Operation
If the accumulated operation time of the product
exceeds 30 hours, the Smart Clean automatically starts
when the unit is turned off.
Manual Smart Clean Operation
When the unit stop, press the FUNC. button to select
Smart Clean.
NOTE
• The brush clean a dust from the filter by moving from
left to right or from right to left on the filter. The sucked
dust is collected into the dust box.
• Some functions may not be supported, depending on
the model.
Energy Saving Cooling (Optional)
Energy Saving Cooling is the function to adjust the
desired temperature during cooling operation to
enhance the comfort of the user and improve the energy
saving performance.
• is displayed on the display screen.
NOTE
• It can be selected only during the cooling operation.
• When pressing Energy Saving Cooling while cooling at
22 °C (71 °F) or lower, it is automatically set to 22 °C
(71 °F)
• During the Energy Saving Cooling operation, the
temperature on the remote control may be displayed
differently from the air conditioner display.
• Smart Mode / Energy Saving Cooling / Refresh Mode
functions cannot be set at the same time.
• Some functions may not be supported, depending on
the model.
Electric Heater (Optional)
It can only be set during heating operation.
• is displayed on the display screen.
NOTE
• The indoor unit displays during the heating mode, the
Auxiliary heater is automatically turned on, but it is not
displayed on the wireless remote controller separately.
• It operates in Floor heating mode in Console products.
• Heating Mode is not available for Cooling only
models.
• Some functions may not be supported, depending on
the model.
Comfort Cooling (Optional)
This function is automatically control the cooling
strength to maintain the pleasant feeling without turning
off the product after the indoor temperature reached the
desired temperature.
• is displayed on the display screen.
NOTE
• It can be selected only during the cooling operation.
• Some functions may not be supported, depending on
the model.