Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATION
- Before Use
- Product Overview
- Preparing before Operation
- Wireless Remote Control Overview
- Using Wireless Remote Control
- Operating with the Wireless Remote Control
- Cooling, Auto, Dehumidification, Heating, Fan Mode
- Jet Mode
- Adjusting the Fan Speed
- Adjusting the Airflow Direction
- Timer Setting
- Special Functions
- Checking Room Temperature
- How to Use Air Purification (On Some Models)
- Checking Overall Cleanliness (On Some Models)
- Air Quality Level Color Setting (On Some Models)
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
23OPERATION
ENGLISH
• The same standard as ultra fine dust is applied
to super ultra fine dust’s dust concentration
level. (LG standard)
• Dust concentration evaluation is carried out with
LG standard test dust.
• The shaking around the dust sensor may hinder
the normal operation of the dust sensor, and the
displayed concentration may be different from
the actual dust concentration.
• You can use it only in overall cleanliness function
applied models.
Air Quality Level Color Setting (On
Some Models)
1 Press the Jet Mode and Reset button
simultaneously.
2 Press a button to set the function code a.
a Function code
3 Press b button to set the setting code b.
a Setting code
4 Press the power t button toward the indoor
unit 1 time.
• Each countries have different standards for
indicating overall air quality. Please refer to
table.
5 Reset the wireless remote control to use the
general operation mode.
Value Step
Overall Air
Quality
Type 1 (1
beep)
4 steps (For
korea)
Good, Moderate,
Unhealthy, Poor
Type 2 (2
beep)
4 steps (For
global)
Good, Moderate,
Unhealthy, Poor
Type 3 (3
beep)
6 steps (For
china)
Good, Moderate,
Unhealthy, Poor,
Very poor, Severe