Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATION
- Before Use
- Product Overview
- Preparing before Operation
- Wireless Remote Control Overview
- Using Wireless Remote Control
- Operating with the Wireless Remote Control
- Cooling, Auto, Dehumidification, Heating, Fan Mode
- Jet Mode
- Adjusting the Fan Speed
- Adjusting the Airflow Direction
- Timer Setting
- Special Functions
- Checking Room Temperature
- How to Use Air Purification (On Some Models)
- Checking Overall Cleanliness (On Some Models)
- Air Quality Level Color Setting (On Some Models)
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
21OPERATION
ENGLISH
1 Press the Func. (Function) button repeatedly
to select the Comfort Cooling function.
2 Press the Set/Clear button to set the function.
Checking Room Temperature
Check the current room temperature.
• Press the
d button for about 3 seconds. The
current room temperature is briefly displayed on
the wireless remote control screen for awhile.
How to Use Air Purification (On
Some Models)
Ionizer and air purification filter make the indoor
air pleasant.
• Press Air Purify button to start the air
purification operation.
Using Air Purification During
Operation Modes
• During cooling, dehumidification, heating or
auto changeover operation, if you press Air
Purify button, you can use air purification
operation at the same time.
• During air purification operation, if you press
Mode button, you can use cooling,
dehumidification, heating or auto changeover
operation at the same time.
Smart Air Purification
• Dust sensor detects the indoor air
contamination level, and if overall cleanliness is
level Unhealthy or more, it automatically starts
air purification operation. When overall
cleanliness reaches level Good air purification
operation stops. If you do not want smart air
purification operation, clear by pressing Air
Purify button. Until you turn off the product and
turn on again, air purification operation is not
operated automatically.
• It works only in overall cleanliness function
applied model.
NOTE
• Air purification single operation is the operation
with low energy consumption.
• During air purification single operation, wind
direction function can be used, but temperature
control function cannot be used.
• During cooling operation or dehumidification
operation, if you want air purification single
operation, press Power button to turn off the
product, and press Air Purify button.
Checking Overall Cleanliness (On
Some Models)
It displays the indoor cleanliness.
1 Turn the appliance on.
2 During the operation, if you press Air Purify
button for about 3 seconds, you can check the
indoor cleanliness in each level on smart
indicator of the product.
• Dust concentration referred to the data sheet of
the sensor manufacturer.