Owner’s Manual

ENGLISH
FRANÇAIS ESPAÑOL
13
OPERATION
Power Heating Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Heating Mode.
3
Press JET MODE button.
• is displayed on the display screen.
NOTE
• Heating Mode is not available for Cooling only
models.
• Some functions may not be supported, depending on
the model.
Fan Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Fan
Mode.
• is displayed on the display screen.
3
Press FAN SPEED button repeatedly to adjust the
fan speed.
NOTE
• Natural wind based on chaos logic
− For a fresher feeling than other fan speeds, press
the Indoor Fan Speed Selector and set to chaos
mode. In this mode, the wind blows like a natural
breeze by automatically changing fan speed based
on the chaos logic.
• During Fan Mode
− The outdoor compressor doesn’t work. Have a
function to circulate the indoor as it sends out the
air that doesn’t have much temperature difference
with indoor.
Using the Auto Operation
Function
Auto Operation Mode
This mode automatically sets the fan speed and
temperature depending on the room temperature.
Cooling Only Model
In this mode, you cannot adjust the fan speed, but you
can set the air deflector to rotate automatically.
1
Turn the appliance on
2
Press MODE button repeatedly to select the Auto
Operation Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
• Please select the code depend on your feeling.
Code Description
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm
Cooling & Heating Model
This mode changes the mode automatically to maintain
the set temperature at ±2 °C (4 °F)
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Auto
Operation Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
• Setting temp range: 18 °C ~ 30 °C (64 °F ~ 86 °F)
4
Press FAN SPEED button repeatedly to adjust the
fan speed.