Owner’s Manual

MAINTENANCE

Cleaning the Deodorization

Filter/PM1.0 Filter (Optional)

Press the fixing hooks on both sides and open the

front grille.

Remove PM1.0 filter by pressing the fixing hook.

Remove the photocatalyst Deodorization filter by

pulling upward.

After assembling in reverse order, close the front

grille.

PM1.0 Filter

Deodorization Filter

WARNING

• For safety, turn off the main power switch.

CAUTION

• Be careful that the filter case is correctly

assembled to the filter holder.

• Be careful not to drop the front grille when

removing the filter.

• Do not wash the dust filter with hot water over 40 °C

or volatile liquids.

• Do not wash the photocatalytic Deodorization filter

in water.

• After cleaning the PM1.0 filter, the buzzer sounds

7 times if the water is not completely dry. Dry the

filter thoroughly.

• Drying the filter near a fire or in direct sunlight may

cause damage to the filter.

• Wear gloves during installation.

NOTE

• The quantity and type of filters provided by each

model may differ.

• The feature may be changed according to the type of

model.

• Some functions may not be supported, depending on

the model.