Owner’s Manual

14
OPERATION
Using the Air Flow Direction
Function
Up/Down Airflow Direction Control
(Optional)
The up/down airflow (Vertical Airflow) can be adjusted
by using the remote controller.
1
Turn the appliance on.
2
Press the button.
• The louvers will swing up and down.
3
Press the button again to set the vertical louver
at the desired airflow direction.
NOTE
• If you press the button, the horizontal airflow
direction is changed automatically based on the
Auto Swing algorithm to distribute the air in the
room evenly and at the same time to make the
human body feel more comfortable, as if enjoying a
natural breeze.
• Always use the remote controller to adjust the up/
down airflow direction. Manually moving the vertical
airflow direction louver by hand, could damage the
air conditioner.
• When the unit is shut off, the up/down airflow
direction louver will close the air outlet vent of the
system.
• Some functions may not be supported, depending
on the model.
Left/Right Airflow Direction Control
(Optional)
The left/right (horizontal) airflow can be adjusted by
using the remote control.
1
Turn the appliance on.
2
Press the button.
• The louvers will swing left and right.
3
Press the button again to set the horizontal
louver at the desired airflow direction.
NOTE
• Up/Down and Left/Right Airflow function isnʼt shown
on the display of remote controller.
• Some functions may not be supported, depending
on the model.
Indirect Wind
It adjusts the wind direction to indirect wind.
1
Press the AIR FLOW button repeatedly until
icon displayed.
2
Press the SET/CLEAR button to set or cancel this
function.
NOTE
• The above function may not be supported by some
products.
Direct Wind
It adjusts the wind direction to direct wind.
1
Press the AIR FLOW button repeatedly until
icon displayed.
2
Press the SET/CLEAR button to set or cancel this
function.
NOTE
• The above function may not be supported by some
products.