Owner’s Manual

ENGLISH
FRANÇAIS ESPAÑOL
19
MAINTENANCE
Purifying filter (Optional)
1
After removing the air filters, pull slightly forward to
remove the PLASMA filter.
2
Dip the PLASMA filter into the water mixed with
neutral detergent, for 20-30 minutes.
3
Dry the PLASMA filter in the shade for a day.
• It is very important that all moisture is removed
on these parts.
4
Note the cuts of electric discharge lines.
5
Re-install the PLASMA filter to the original position.
CAUTION
• Wait at least 10 seconds before touching the
PLASMA filter after opening the inlet grille, it
could cause an electric shock.
NOTE
• The PLASMA filter behind the air filters should be
checked and cleaned once every 3 months or more
often if necessary.
Replacement
1
Open the front panel and remove the air filter.
2
Remove the air purifying filter.
3
Insert a new air purifying filter.
X
Y
4
Reinsert the air filter and close front panel.