User guide

30
User title setting
You can use the camera identification to assign a number
and character to the camera. The USER TITLE is displayed
on the upper left of the screen.
To disappear the user title, select [OFF].
1. Select [USER TITLE] option on the [OSD] menu.
2. Use [Near] or [Far] button to select a [ON] then press
[Open] or [Close]. The USER TITLE menu appears.
A
3. Use [In], [Out], [Near] or [Far] button to select a
character or number.
- CLR: If you enter the wrong code, select CLR
then press [Open] or [Close].
- POS: Use [Near] or [Far] button to move
position of USER TITLE on the screen.
- END: Confirm your selection.
- A(Blank): Insert a space at the cursor position.
- / : Moves cursor to left or right.
Language setting
Select a language for setup menu and information
display.
Reset settings
1. Select [RESET] option.
2. Press [Open] or [Close] button and the RESET menu
appears.
3. Use [In] or [Out] to select option.
• FACTORY RESET: Clear certain settings and
information and return to factory default settings.
• S/W VERSION: Displays the software version on the
monitor.
• REBOOT: Reboot the camera system.
• TILT LIMIT: You can specify the tilt range. If you set
this function, the camera is able to tilt from 5˚ to
175˚.
1. Select [TILT LIMIT] option on the [RESET]
menu.
2. Use [Near] or [Far] button to set it [ON].
If you do not want to use this function, set it
to [OFF].
Note:
• The hidden range of screen depends on
the [TILT LIMIT] setting.
• The [PATTERN] function is influenced by
[TILT LIMIT]. Readjust the [PATTERN] value
after set to [ON] in the [TILT LIMIT] option.
4. Press [Open] or [Close] to confirm your selection.