User guide

6
m Day & Night Function
This camera can be selected Color or Black & White.
You can set Color in the daytime and Black & White at
night due to the low illumination. (Filter Conversion
type)
m DSS (Digital Slow Shutter) function
It is possible to highly sensitive surveillance because
of DSS(Digital Slow Shutter) function.
m WDR (Wide Dynamic Range) function
The camera can be best condition to watch easily
inside or outside in the strong back light.
m Power Supply
This camera must always be operated a DC 12 V
Certified/Listed, class 2 power supply only.
Safety Precautions
m Do not attempt to disassemble the camera
To prevent electric shock, do not remove screws or
covers. There are no user serviceable parts inside. Ask
a qualified service personnel for servicing.
m Avoid the camera with direct sunlight
Do not aim the camera at bright objects. Whether
the camera is in use or not, never face it with direct
sunlight or other extremely bright objects.Otherwise
blooming or smear may be caused.
m Handle the camera with care
Do not abuse the camera. Avoid striking, shaking, etc.
The camera could be damaged by improper handling
or storage.
m Do not use strong solvents or detergents
Use a dry cloth to the camera when it is dirty. If it is
hard to remove the dirt on the camera, use a mild
detergent and wipe it gently.
m Do not install this camera upside down
This camera is designed for mounting on the ceiling
or wall.If you install this camera upside down,
for example, mounted on the floor, it may cause
malfunction.
m Do not use the camera in such places as shown
below.
The lens may become cloudy due to condensation if
the camera is used under the following conditions.
• Rapid temperature fluctuation by switching an air
conditioner on and off.
• Rapid temperature fluctuation due to frequent
door opening and closing.
• Use in an environment where eyeglasses become
foggy.
• Use in a room filled with cigarette smoke or dust.
If the lens becomes cloudy due to condensation,
remove the dome cover and wipe all moist surfaces
with a soft cloth.
m Before operating, please check proper
temperature, humidity and power source ratings.
Use the camera under conditions where temperature
is between -20 °C to 50 °C and humidity is below 80
%. The input power source is DC 12 V.
m Consumables
Parts having contacts such as the lens-drive motors,
cooling fan built inside the camera are subject to wear
with time. About replacement and maintenance of
such parts, please ask the nearest service center.