User guide
7
Introduction
LCP2840-DN/LCP2840-DP
“A”
d
e
f
g
a
b
c
h
a Camera mounting bracket
b Dome camera body
c Dome cover assembly
d Video output cable with BNC connector
Connects with the video connector of the monitor.
e Power cable (DC 12 V)
f Data Communication Terminal - RS-485
g Data Communication Terminal - Alarm Input
h Fall Prevention Wire
Be sure to hook the fall prevention wire into a bracket.
Caution:
When you fix the dome cover to the dome camera
body, you must insert the wire in the dome camera
body. If not, the wire may obstruct the camera’s
moving.
“A”
Do not expose the power and data cable to
moisture, this may cause leakage into the
housing and damage the camera. If you must, please
make sure that the connections are sealed tightly.
After installing the camera, you should arrange the
cables using the outlet box to protect the cables.
Identication of Camera