ENGLISH OWNER’S MANUAL SMART CAR AUDIO Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information CAUTION 1 RISK OF ELECTRIC SHOCK DO NOT OPEN or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. (-10 °C to 60 °C) Getting Started CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.
Getting Started k iPOD Activates iPod/iPhone CONTROL MODE. Front panel Remote control l Y/U Skip / Search / Seek / Tune 1 Getting Started m FUNC In each mode, sets playback items. • MENU Activates setting menu. n REC Recording to USB. o Remote Sensor p INT Intro scan. a SRC / • OFF - When pressed, selects function sources. - When pressed and held, powers unit on or off. b R Ejects a disc. c T Plays and pauses playback. MUTE Temporarily stops the sound.
Connecting h c/v Skip / Search / Seek / Tune Battery Installation Installation Type 1 i DISP - Press it, you can check the clock time. - Press and hold it, you can turn on/ off the display window and the light of LED buttons. j RPT Repeats playback. Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1. Remove the rear support from the unit. 2. Remove the control panel and trim ring from the unit.
Connecting About detachable control panel Detaching the control panel 1. Press the 6 to open the control panel. Attaching the control panel 2. Lift the control panel slightly. 3. Push the control panel to right. 2 Connecting 1. Align the left side of the panel with the stopper. 2. Push the right side of panel into the unit until it clicks. > Caution The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.
Connecting 7 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Wired remote input (Black): Hard-wired control adapter can be connected. (Optional) To Audio in To Audio out 2 Front Left Front Right Amplifier ab c d ab c d e f g h e f g h Power Antenna > Caution Control Relay When being connected in a wrong way, the unit displays as follows.
Operating Operation Basic operations 1. Turn the unit on by pressing any key on the unit. 2. Select a source by pressing SRC. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W / S on the remote control. 3 , Note 3D SOUND is only available when you use the CD/ USB. (Except iPod/ iPhone) When you are recording, 3D SOUND will be turned off automatically. Checking the clock Turning off the sound temporarily 1. Press DISP. 2. Press it again to cancel. 1.
Operating For [LIGHT] setting You can adjust the light effects by adjusting LED, DIM, or DIM LV. LED COL1 / COL2 / AUTO : You can change the LED window color. DIM (Dimmer) OFF / ON : You can change the brightness of the display window during the power-on status. Settings Description DIM ON The display window becomes dark. DIM OFF The display window becomes bright. For [OTHER] setting AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit.
Operating Using the FUNC button On the unit 1. Press FUNC. 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to select the option. 4. Press the volume knob to set the option. If you want to return to the previous step, press . On the Remote Control 3 Operating 1. Press FUNC / • MENU. 2. Press w / s to select an item and press it. 3. Press w / s to select the option. 4. Press ENTER to set the option. If you want to return to the previous step, press .
Operating , Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Listening to a preset station 1. Press BAND repeatedly to select a desired band. 2. Press the volume knob on the unit. Or press ENTER on the remote control. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 4. Press the volume knob. Or press ENTER on the remote control.
Operating Using an USB device 1. Open the USB cover. 2. Connect the USB device. 3. Press SRC repeatedly to select a source to USB. Moving to another drive When connecting this unit to multi reader, press BAND on the unit (or DRV on remote control) to go the next drive. Each time you press the button, the driver modes change. Quick search of a desired file 3 Operating 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2.
Operating Checking information about your music MP3 / WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3 / WMA file playback. If there is no information, "NO TEXT" will be shown in the display window. Playing back files in a way you want On the Unit On the Remote Control 1. Press RPT / SHF. 2. Press it again to cancel. Or 1. Press FUNC / • MENU. 2. Press w / s to select an item and press ENTER. 3. Press w / s to select the option. 4.
Troubleshooting Troubleshooting Symptoms Cause Solution Power doesn't turned on. Leads and connectors are not properly. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are causing the built in microprocessor to operate incorrectly. Turn the unit off and then on again. Cables are not connected correctly.
Appendix Specifications 15 CD Frequency Response : 20 Hz to 20 kHz General S / N Ratio : 80 dB Output Power : 53 W x 4 CH (Max.) Distortion : 0.12 % Power Source : DC 12 V Channel Separation (1 kHz) : 55 dB Speaker impedance : 4 Ω Ground System : Negative Dimensions (W x H x D) : (178 x 50 x168) mm (without Control Panel) Net Weight : 1.32 kg TUNER FM Tuning Range : 87.5 MHz to 108.0 MHz S / N Ratio : 55 dB Distortion : 0.