OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCV5100-BN LCV5100-BP 1205(V1.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. • Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.
Important Safety Instructions 1. Read these instructions. and the point where they exit from the apparatus. 2. Keep these instructions. 3. Heed all warnings. 11. Only use attachments/accessories specified by the manufacturer. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated a AC 24 V or DC 12 V Certified/Listed, class 2 power supply only. Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations. Handling of the unit Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body.
Contents Features.............................................................................. 8 Specification.................................................................... 35 Accessories................................................................................... 8 Part Names and Functions................................................ 9 Connections..................................................................... 10 Basic connection.......................................................
MEZ62687703 SELFTAPPING SCREW 4 Place PRODUCT CENTER POSITION Features This Color Video Camera is designed for installation in a video surveillance system. This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system. Should you require any technical assistance, please contact authorized service center. • High resolution and high sensitivity with a 6 mm (1/3 Type) Exview HAD CCD II. • Automatically switch between DC 12 V and AC 24 V.
Part Names and Functions a Dome Cover b Lens Cover c Focus lock lever a Fixes the focus position after adjusting. d Zoom lock lever Fixes the zoom position after adjusting. b c d e f g h i j k e Azimuth adjuster f Tilting lock screw Fixes the tilting position after adjusting. g Pan adjuster h Setup menu control buttons i Video Out connector Use this jack for checking the picture with portable monitor when install the camera.
Connections Basic connection The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied. 1. 10 Make the video signal connection between the camera and the monitor or DVR. 2. Connect a external power source to the power input jack of the camera.
Installation Note: PRODUCT CENTE R POSITION CABLE HOLE (LCV5 CABLE HOLE (LCD5 300) 300) FRONT SELFTAPPING SCREW 4 Place MEZ62687703 FRONT Follow the instructions below to surface mount the camera with supplied camera mounting bracket. SELFTAPPING SCREW 4 Place MEZ62687703 Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. Using the template as a guide, make a hole through the ceiling. 1.
W Installation PRODUCT CENTER POSITION POSITION FRONT SELFTAPPING SCREW 4 Place MEZ62687703 SELFTAPPING SCREW 4 Place MEZ62687703 FRONT CABLE HOLE (LCV53 CABLE HOLE (LCD53 00) 00) PRODUCT CENTER CABLE HOLE (LCV53 CABLE HOLE (LCD53 00) 00) 12 Connect the cables to the cable jacks of the camera body. 4. Install the camera mounting bracket to the ceiling. 3.
Installation 5. Assemble the camera and the housing. Make sure when you assemble the camera in the right direction. And then, assemble the dome cover and lens cover. 6.
Installation Image Adjustment You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Notes: • Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. • The video output to the BNC will be interrupted while a portable monitor is connected to the video jack. 1. Use the supplied wrench to loosen the screws and remove the dome cover Remove the Dome cover and lans cover. 14 2. Connect a portable monitor to the video jack.
Installation 3. Adjust the pan/tilt/rotate position of the camera. 4. Adjust the zoom. 4-1. Unlock the zoom lever. 4-2. Move the lever to adjust the zoom. 4-3. Lock the lever.
Installation 5. Adjust the focus. 6. 5-1. Unlock the focus lever. 5-2. Move the lever to adjust the focus. 5-3. Lock the lever. FAR 16 NEAR This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons. After then attach the lens cover and dome cover.
Menu Operation • UP button: Used to move upper direction on the menu screen. Use this button to select an item or adjust the parameters. • DOWN button: Used to move lower direction on the menu screen. Use this button to select an item or adjust the parameters. • RIGHT button: Moves the cursor to the right. Used to increment the value selected in the menu. The parameter changes each time this button is pressed. • DOWN LEFT RIGHT LEFT button: Moves the cursor to the left.
Menu Operation -The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respective items in these menus. Main Menu Sub Menu Contents BACKLIGHT EXPOSURE ALC /ELC BRIGHTNESS 0 to 100 AGC OFF/LOW/MIDDLE/ HIGH SHUTTER 1/120 000, ..., 1/160, A.FLK, OFF, AUTO, x2, ...
Menu Operation Main Menu Sub Menu 3D-DNR Sub Menu Contents 0 to 100 OFF MASK SELECTION 1 to 8 DISPLAY OFF,MOZAIC, COLOR1 to COLOR 8 RECTANGLE POSITION ,/ POSITION ;. PRIVACY MASK Main Menu Contents ON CIRCLE PRIVACY MASK ON POLYGON 2 to 98 2 to 98 SIZE ,/ 4 to 100 SIZE ,/ 4 to 100 EXIT TOP/RET/END MASK SELECTION 1 to 4 DISPLAY OFF,MOZAIC, COLOR1 to COLOR8 POSITION ,/ 0 to 100 POSITION ;.
Menu Operation Main Menu SYSTEM Sub Menu FACTORY RESET EXIT Contents - General Operation 1. Press [SET] button. The setup menu screen appears on the monitor. 2. Use [UP] or [DOWN] button to select an option then press [SET] button. Submenu appears on the monitor. 3. Use [UP] or [DOWN] button to select a submenu option. TOP/RET/END EXIT 4. Use [LEFT] or [RIGHT] button to select a value. • • • 20 TOP: Return to the CAMERA SETTING menu screen. RETURN: Return to the previous.
Menu Operation Exposure Settings You can set the exposure options using the EXPOSURE menu. 1. Select [EXPOSURE] option on the [CAMERA SETTING] menu. 2. Use [LEFT] or [RIGHT] button to select a mode. 3. Press [SET] button and the EXPOSURE menu appears. Backlight setting Use Backlight option to view the object clearly in backlight conditions. 1. Select [BACKLIGHT] option. 2. Use [LEFT] or [RIGHT] button to select a mode then press [SET].
Menu Operation luminance scene. BRIGHTNESS setting AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a [ON] or [OFF]. Press [SET] to exit the Area setting menu. >> GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale. >> USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level. (5 level) >> MASK: Use [LEFT] or [RIGHT] button to select [ON] or [OFF].
Menu Operation AGC (Automatic Gain Control) setting SHUTTER (Shutter Speed) setting If the images are too dark, change the maximum [AGC] value to make the images brighter. Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker. 1. Select [AGC] option. 2. Use [LEFT] or [RIGHT] button to select a mode. 1. Select [SHUTTER] option. 2. Use [LEFT] or [RIGHT] button to set shutter speed.
Menu Operation SENS-UP setting Note: If pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture. • If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and [---] mark is displayed. White Balance settings Select the method by which the camera shifts its output colors to compensate for the color of a light source. 1. 2. Use [UP] or [DOWN] button to select [SENS-UP] option.
Menu Operation • ATW (Auto-Tracing White Balance): Use [LEFT] or [RIGHT] button to select the ATW then press [SET] button. • AUTO: Use [LEFT] or [RIGHT] button to select the AUTO then press [SET] button. • AWC/SET KEY: If you select the AWC/SET KEY mode, you will be able to set up the White Balance automatically using [SET] button. • MANUAL: You can set the white balance options manually. >> >> RED: Obtains the optimum amount of red gain. BLUE: Obtains the optimum amount of blue gain.
Menu Operation • select [ON] or [OFF]. LEVEL: Use [LEFT] or [RIGHT] button to select a level. >> DWELL TIME: Use [LEFT] or [RIGHT] button to select a dwell time. DAY: Color mode enabled. • NIGHT: Black-and-white mode enabled. >> Motion Detection Setting The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can select the level of sensitivity for motion detection to 8 zone. BURST: Use [LEFT] or [RIGHT] button to select [ON] or [OFF].
Menu Operation OFF on the STATE. • Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. >> 4. POSITION,/: Moves horizontal position of the mask. >> POSITION;.: Moves vertical position of the mask. >> SIZE,/ : Enlarge or decrease the horizontal size of the mask. >> SIZE;.: Enlarge or decrease the vertical size of the mask. Use [SENSITIVITY] option to obtain the optimum detection level. 3D-DNR Setting 5. Use [LEFT] or [RIGHT] button to select the DISPLAY option.
Menu Operation Privacy Mask Setting >> This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 14 zones can be registered. • Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. -POSITION,/: Moves horizontal position of the mask. -POSITION;.: Moves vertical position of the mask. -SIZE,/: Enlarge or decrease the horizontal size of the mask. -SIZE;.
Menu Operation of the mask. SIZE,/: Enlarge or decrease the horizontal size of the mask. -SIZE;.: Enlarge or decrease the vertical size of the mask. -RADIUS SIZE : You can adjust the RADIUS SIZE. POLYGON : -- • >> >> >> >> Notes: • You can adjust the mask color manually except for COLOR 8. • RED, GREEN, BLUE and TRANSPARENCY adjustments are applied in common from COLOR 1 to COLOR 7, after mask setting. Use [LEFT] or [RIGHT] button to select a mask on the [MASK SELECTION].
Menu Operation Special Menu Settings This menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the SPECIAL menu. 1. Select [SPECIAL] option. 2. Press [SET] button and the SPECIAL menu appears. 30 Setting the D-ZOOM (Digital Zoom ) level You can select the digital zoom level. 1. Select [D-ZOOM] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET] the DIGITAL ZOOM menu appears.
Menu Operation • TILT: Use [LEFT] or [RIGHT] button to move the screen. (up or down) Setting the D-EFFECT (Digital effect) Setting the SHARPNESS effect The degree to which the boundary of the two portions is clearly distinguished. You can select the digital effect. 1. Select [D-EFFECT] option on the [SPECIAL] menu. 2. Use [LEFT] or [RIGHT] button to select a digital effect. • V-FLIP: Flip the picture vertically. • MIRROR: Turn on the mirror effect. • ROTATE: Rotate the picture.
Menu Operation Setting the COLOR SYNC Setting You can switch the displayed picture to gray scale or color. 1. Select [SYNC] option on the [SPECIAL] menu. 1. Select [COLOR] option on the [SPECIAL] menu. 2. The [SYNC] option is set to [INT] automatically. 2. Use [LEFT] or [RIGHT] button to change a color effect. Note: • ON: To display the picture with color. AC24V Adaptor have to use for the [LL] mode setting. • OFF: To display the picture with grayscale.
Menu Operation Setting the USER TITLE • You can use the camera identification to assign a number and character to the camera. The USER TITLE is displayed on the upper left of the screen. To disappear the user title, select [OFF]. • 1. Select [USER TITLE] option. 2. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET]. The USER TITLE menu appears. A (Blank): Inserts a space at the cursor position. / : Moves cursor to left or right.
Menu Operation SYSTEM Setting 1. Select the [SYSTEM] menu. 2. Press [SET] button and the [SYSTEM] menu appears. 3. Use [UP] or [DOWN] button to select the option. • 4. FACTORY RESET: To reset the camera setting to factory setting, select the [FACTORY RESET] option. Press [SET] button to confirm your selection. Note: The menu screen is move to top menu, after set up [FACTORY RESET].
Specification Item LCV5100-BN Signal System NTSC PAL Total/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 Pixels Image Device LCV5100-BP 6 mm (1/3 Type) Exview HAD CCD II DSP XDI-V Lens 2.8 mm to 11 mm Vari-focal Lens, F1.2 Digital Zoom x16 IRIS Control DC Sync. System Internal / Line Lock Scanning Frequency (H/V) Horizontal Resolution 15.734 KHz / 59.94 Hz 15.
Specification Item LCV5100-BN DNR Electronic Shutter Speed White Balance LCV5100-BP 2D + 3D-DNR 1/60 to 1/120 000 1/50 to 1/120 000 ATW / AUTO / AWC/SET KEY / MANUAL Motion Detection 8 Zones Privacy Zone Masking 14 Masks Digital Effect OFF / MIRROR / ROTATE / V-FILP Communication Coaxial Communication Power Source DC 12 V / AC 24 V Power Consumption 190 mA Operation Temperature/ Humidity -10 ºC to 50 ºC / 0 % RH to 80 % RH Storage Temperature/ Humidity -20 ºC to 60 ºC / 0 % RH to 90 %
