DISHWASHER OWNER'S MANUAL MODEL : LD-2060WH / LD-2060SH / LD-2060MH LD-2060WHB / LD-2060SHB / LD-2060MHB LD-2060WHU / LD-2060SHU / LD-2060MHU Please read this manual carefully before operating dishwasher. Retain it for future reference. Capacity 12 Place Dimension 600x600x850mm(WxDxH) Weight 52 Power Supply See rating label Power Consumption See rating label Water Feed Pressure P/No.
CONTENTS SAFETY AND CAUTION IMPORTANT SAFETY INSTRUCTIONS WARNING ? Please read this manual using ? ? - using your dishwasher, follow including the following: When carefully before During the dishwasher for the first time. ? This manual contains very important notes regarding the installation, use and maintenance of your dishwasher.
SAFETY AND CAUTION Child ? ? ? ? INSTALLATION INSTRUCTIONS Safety Controls may be locked changed by a child. using "Child Lock" mode to prevent from all the setting from being children away from detergents and rinse-aids. Do not allow children to operate the dishwasher. children should be supervised to ensure that they do not play with the appliance. cabinet Step PREPARE CUPBOARD OPENING This dishwasher is 1 size shown as designed to 2 or a wall.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Step3: Step4: Step5: PREPARE DISHWASHER FOR INSTALL THE DISHWASHER IN DRAIN LINE CONNECTION INSTALLATION CUPBOARD 1 the dishwasher 1 Lay 2 Adjust the cabinet as legs on its back. to the needed shown in below height figure. the drain line, sliding the dishwasher into the cupboard opening, all necessary final height adjustment and balancing adjustment should be done using the spanner.
PARTS NAME INSTALLATION INSTRUCTIONS Step6: Step8: WATER SUPPLY CONNECTION HOW TO LEVEL THE PRODUCT 1 Connect the water supply hose to the behind dishwasher and the water tap shown in figure. 2 After valve installing hear sticky side portion or as a the product, if you feel some frictional sound between the of door and tub when you open or adjust the level of close the door, you have to This dishwasher may be fed with either hot or cold water. If the water can not be product.
FUNCTION OF CONTROL BUTTON Extra Hot / When select Extra Hot function, the operating temperature will be up Start/Pause Dial Rinse+ Power If you want to select program, rotate the dial If you want to start prese the button. clockwise With each press, Start and Pause is repeated to DISPLAY cycle, operating, press this button first for power on. For When select Rinse+ during operation.
HOW TO USE AND OPERATE 1. For the best Be careful large items not to prevent the detergent dispenser lid from opening Dishwasher Loading your washing performance, it is that the dishwasher is loaded important according to instructions. Before loading items into the dishwasher, you must scrape off large particles in particular non soluble items such as bones, toothpicks, pips, etc. 3. the water will contact all surfaces. angle to help properly.
HOW TO USE AND OPERATE 6. ? HOW TO USE AND OPERATE Detergent must be chamber before every program Push latch to open except the Pre-Wash. ? ? Aid ? For filling put into the detergent starting Adding Rinse Dispenser 7. Adding Detergent Dispenser To fill the Rinse Aid chamber, rotate the Please follow the manufacturer's round cap counter clockwise and remove. Fill the container to the maximum level instructions printed on with determining the correct the manual when dosage.
HOW TO USE AND OPERATE 8. Salt HOW TO USE AND OPERATE ■ For Filling This model has a When the salt is exhausted, the salt refill lamp is lighted on automatically during operation. Then the salt should be refilled after finished the cycle. But it is recommended the salt refill should water softener to soften hard water. So you should read these notes carefully for correct operation. provide satisfactory rinsing results, the dishwasher requires soft water, i.e.
OPERATING SEQUENCE PROGRAM The indicator Press the "Power" button the When you press the "power" button, the state of default program being set will be phases lights of the program and all the program consists of will come on. Before starting, the display window shows running time of the selected program. displayed. the Check that there is rinse To start, press the "Start/Pause"button.
USER MAINTENANCE INSTRUCTIONS To prevent trouble and poor operating, it is filters and spray arms at intervals. ? Remove the lower rack first. ? ? Turn the mesh filter counterclockwise off. ? ? ? to check and care for the Take out the mesh filter, upper STS filter and outer filter. Pull the upper rack forwards. Check that the water jet holes blocked Clean them if necessary. Replace them in the reverse order. If a problem by food are The not on particles.
MEMO MEMO 22 23
