User guide
OWNER'S MANUAL
Color Video Camera
Please read this manual carefully before operating 
your set and retain it for future reference.
P/NO : MFL66987602
MODEL
LD120P
LD120N
Important Safety Instructions
1.  Read these instructions. 
2.  Keep these instructions. 
3.  Heed all warnings. 
4.  Follow all instructions. 
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions. 
8.  Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat. 
9.  Do not defeat the safety purpose of the polarized or grounding-type plug. 
A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for replacement of the obso-
lete outlet.
10.  Protect the power cord from being walked on or pinched particularly at 
plugs, convenience receptacles, and the point where they exit from the 
apparatus.
11.  Only use attachments/accessories specified by the manufacturer.
12.  Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to avoid injury from tip-
over.
13.  Unplug this apparatus during lightning storms or when unused for long 
periods of time.
14.  Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
Safety Precautions
Do not attempt to disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user 
serviceable parts inside. Ask a qualified service personnel for servicing. 
Do not use strong solvents or detergents
Use a dry cloth to the camera when it is dirty. If it is hard to remove the dirt on 
the camera, use a mild detergent and wipe it gently. 
Before operating, please check proper 
temperature, humidity and power source 
ratings.
Use the camera under conditions where temperature is between -10 °C to 50 °C. 
Do not expose the camera in such conditions as 
shown below.
Use in a room or area filled with cigarette smoke, dust or gas. 
Avoid the camera with direct sunlight
Do not aim the camera at bright objects. Never face it with direct sunlight or 
other extremely bright objects. Otherwise blooming or smear may be caused. 
Handle the camera with care
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be 
damaged by improper handling or storage. 
Do not expose the camera to rain or moisture
This product is designed for indoor use or location where it is protected from 
rain and moisture. When exposed to moisture, turn the power off immediately 
and ask a qualified service personnel for servicing. Moisture can damage the 
camera and also create the danger of electric shock. 
Specication
ITEM LD120N LD120P
Signal System NTSC PAL
Total/Effective Pixels
410 000 Pixels / 
380 000 Pixels
470 000 Pixels / 
440 000 Pixels
Pick-up Device 6 mm Super Had CCD II
Lens
2.5 mm (A1) / 3.6 mm (C1) / 6 mm (D1)
Day / Night Auto
Scanning System 2 : 1 Interlace
Scanning Frequency 59.94 Hz (VD) 50 Hz (VD)
Resolution
More than 540 TV Lines
S/N Ratio More than 48 dB
Minimum 
Illuminance
0.05 lx
Video Output Signal CVBS 1 Vp-p (75 Ω) 
Shutter Speed
AUTO 
(1/60 to 1/100 000 SEC)
AUTO 
(1/50 to 1/100 000 SEC)
Dip switch AGC / BLC / HSBLC / WIDE BLC
Power Source DC 12 V
Power Consumption Less than 1.15 W
Operation 
Temperature
-10 °C to 50 °C, 0 % RH to 80 % RH
Storage 
Temperature
-20 °C to 60 °C, 0 % RH to 80 % RH
Weight 170 g
Dimension ø( 80 + 88 ) x 67.5 mm
Construction
Front View
Tilt Base
Side View
Dome Cover
Tilting Lock Screw
Lens
CAUTION
RISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equi-
lateral triangle is intended to alert the user to the presence 
of uninsulated dangerous voltage within the product’s 
enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. 
Changes or modifications to this equipment may cause harmful interference 
unless the modifications are expressly approved in the instruction manual. The 
user could lose the authority to operate this equipment if an unauthorized 
change or modification is made. 
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at his 
own expense.
•  A suitable conduit entries, knock-outs or glands shall be provided in the 
cable entries of this product in the end user.
•  Caution: Danger of explosion if battery is incorrectly replaced. Replaced 
only with the same or equivalent type recommended by the manufacturer. 
Dispose of used batteries according to the manufacturer’s instructions.
•  Holes in metal, through which insulated wires pass, shall have smooth well 
rounded surfaces or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du 
Canada.
Warning: Do not install this equipment in a confined space such as a bookcase 
or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric 
Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product 
may cause radio interference in which case the user may be required to take 
adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to 
rain or moisture.
Caution: This installation should be made by a qualified service person and 
should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to 
qualified personnel only.
Caution: The apparatus shall not be exposed to water (dripping or splashing) 
and no objects filled with liquids, such as vases, shall be placed on the appara-
tus.
To disconnect power from mains, pull out the mains cord plug. When install-
ing the product, ensure that the plug is easily accessible.
LG Electronics hereby declares that this/these product(s) is/are in 
compliance with the essential requirements and other relevant pro-
visions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC. 
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, 
The Netherlands (Tel : +31-(0)36-547-8888)
Disposal of your old appliance
1.  When this crossed-out wheeled bin symbol is attached to 
a product it means the product is covered by the European 
Directive 2002/96/EC.
2.  All electrical and electronic products should be disposed of 
separately from the municipal waste stream via designated 
collection facilities appointed by the government or the local 
authorities.
3.  The correct disposal of your old appliance will help prevent 
potential negative consequences for the environment and 
human health.
4.  For more detailed information about disposal of your old 
appliance, please contact your city office, waste disposal 
service or the shop where you purchased the product.
EEE Compliance with Directive. (for Turkey only)
AB28


