User guide

10
HOW TO USE
ENGLISH
Push start/stop button.
- The louver opens and smart dehumidification starts.
But, if there is no button operation, it operates continuously for 30 minutes before operating at
desired humidity 50%.
- The current humidity is displayed on the humidity indicator lamp.
Press operation mode button to select desired operation mode among smart
dehumidification, jet dehumidification, silent dehumidification, spot drying,
and laundry drying mode.
- The selected operation indicator lamp is lighted.
- The selected operation mode starts after 3 seconds.
Press Humidity Control
∧
/
∨
button to change humidity.
- Desired humidity can be set to 30 ↔ 35 ↔ 40 ↔ 45 ↔ 50 ↔ 55 ↔ 60 ↔ 65 ↔ 70.
Humidity can be set with the units of 5%.
- During the humidity setting, desired humidity is displayed on the humidity display part, and the
current humidity is displayed after about 5 seconds.
- Current humidity is displayed in the units of 5% from 25~90%.
If it is less than 25%, it is displayed as 25%, and if it is 90% or more, it is displayed as 90%.
Press Wind Amount Control button to change wind amount.
You can set the wind amount to low or high wind.
HOW TO USE
(1)MFL68026019 영영 2017. 3. 17. 영영 1:26 Page 10