Owner's Manual

MAINTENANCE
The oven may require maintenance or replacement of parts subject
to wear such as seals, bulbs, and so on. The following instructions
describe how to carry out these minor maintenance operations.
Before any intervention, disconnect the power supply of the
device from the isolation switch or the circuit breaker.
12.5 Replacement of light bulb
Remove the bulb protector A by turning anticlockwise and change
bulb B with a similar one. Re-fit the bulb protector A.
Only use oven bulbs (T 300°C).
12.6 Removing door (large oven)
Hold the door on both sides with both hands near hinges A and
raise levers B. Lift up the door forming an angle of about 45° and
remove. To refit, slide the hinges A in the grooves, drop the door
and release levers B.
27