Owner's Manual

Instructions for the user

12.7 Removing door (small oven)

Open the door completely and fit pins (supplied) into the holes from

the inside. Close the door to an angle of about 45°, lift it and

remove it from its seat. To replace, fit the hinge into the groove

provided, then lower the door until it comes to rest and extract the

pins. If the pins are lost, two screwdrivers can also be used.

12.8 Oven door seal

To permit thorough cleaning of the oven, the seal may

be removed. Before removing the seal, take off the

door as described above. Once the door has been

taken off, lift the tabs at the corners as shown in the

figure.

After cleaning, refit the seal with the longer side

horizontal and insert the tabs into the appropriate holes

starting from the top ones.