Owner's Manual

14.3 Electrical connection
It is obligatory for the electrical system to be grounded according to
the methods required by safety rules.
When linking up to mains by plug and socket, make sure that both
are compatible to the power requirement and connect by means of
a power cable complying with applicable regulations.
The socket must be accessible after the appliance has been built in.
Never unplug by pulling on the cable.
Immediately after installation carry out a brief inspection test of
the oven, following the instructions. Should the appliance not
function, disconnect it from the supply and call the nearest
technical assistance centre.
Never attempt to repair the apliance.
Avoid use of adapters and shunts as these could cause overheating
and risk of burns.
If a fixed power connection is being used, fit a power cord with an
omnipolar circuit breaker with a contact opening gap equal to or
greater than 3 mm in an easily accessible position in proximity to
the oven.
31