Owner's Manual

22 OPERATION
8 End of cycle.
• When the cycle is complete, a chime will
sound and the display will show ENd until
the door is opened or Power is pressed. To
save energy, press and hold High Temp for
three seconds to set the ENd display to
automatically turn off a few minutes after
the cycle ends.
CAUTION
• Do not open the door during operation or
immediately after it has completed the wash
cycle as the escaping steam may cause scalding
as the door is opened.
NOTE
• Empty the lower rack first and then the upper
rack. This will avoid water dripping from the
upper rack onto dishes in the lower rack.
Auto-Off
The dishwasher automatically turns off after four
minutes of inactivity if paused or if no cycle is
started.