Owner’s Manual

27OPERATION
ENGLISH
option if leaving dishes overnight. Press and hold
Extra Dry for three seconds to activate Night Dry.
• After the cycle ends, the fan runs for an hour to
help vent the warm, moist air in the tub. You can
stop the fan by opening the door after the cycle
ends.
Turbo
This cycle will clean heavily soiled dishes in an hour
using slightly more energy and water.
• This cycle does not have drying. Select the Extra
Dry and Night Dry option or another cycle for
better drying.
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or
NFC.
NOTE
• Only the cycle code for the current Download
Cycle appears on the appliance. See the
smartphone app for cycle codes, names, and
more information about the available cycles.
- Default Cycle : P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
• Press and hold Heavy for three seconds to
activate.
Rinse
This cycle is a quick rinse for dishes that will not be
washed immediately. The cycle rinses dishes that
have excess soil to soften dried on residue. Rinsing
the dishes helps prevent odors in the dishwasher.
No detergent should be used.
• This cycle does not have drying.
• Press and hold Normal for three seconds to
activate.
Express
This cycle will quickly clean lightly soiled dishes.
• This cycle does not have drying. Select the Extra
Dry and Night Dry option or another cycle for
better drying.
• Press and hold Turbo for three seconds to
activate.
Options and Extra Functions
Select the desired cycle and then select the options
for that cycle.
Dual Zone
This option automatically sets the spray intensity
to soft for the upper spray arm and strong for the
lower spray arm. Place heavily soiled dishes like
plates and bowls in the lower rack and lightly
soiled dishes like cups and small plates in the
upper rack to get the best results.
Half Load
This option washes intensively by selecting the
upper or lower racks. For small loads, use just the
upper or lower rack to save energy and time. Press
the Half Load button repeatedly to select the
upper [
f] or lower [g] rack or to cancel the
option.
Energy Saver
This option saves energy by reducing the wash and
rinse temperatures. Wash time is increased to
maintain wash performance. Do not use this cycle
with heavily soiled dishes.
Steam
This option adds steam at the start of the cycle to
improve wash performance.
If the Steam option is added to a cycle, the
indicator
a stays lit at the end of the cycle if the
dishes were properly sanitized (on some models).
If the dishwasher could not properly sanitize the
dishes because the Steam option was not
selected, the cycle was interrupted or the water
could not be heated to the required temperature,
the indicator will not light up at the end of the
cycle. Open and close the door or press POWER to
turn the indicator off.