Owners Manual
Table Of Contents
- PRODUCT FEATURES
- SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- Installation Parts and Tools
- Installation Overview
- Product Dimensions
- Product Specifications
- Preparing Cabinet Opening
- Preparing Water and Electrical Connections
- Preparing Dishwasher
- Attaching Installation Brackets
- Sliding Dishwasher into Cabinet Opening
- Connecting Water Supply Line and Power
- Connecting Drain Hose
- Leveling Dishwasher
- Securing Dishwasher to Cabinet Opening
- Final Installation Check
- OPERATION
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
- CARACTERÍSTICAS DEL PRODUCTO
- INSTRUCCIONES DE SEGURIDAD
- DESCRIPCIÓN GENERAL DEL PRODUCTO
- INSTALACIÓN
- Piezas y herramientas para la instalación
- Descripción general de la instalación
- Dimensiones del producto
- Especificaciones del producto
- Preparación de la abertura para el gabinete
- Preparación de las conexiones eléctricas y de agua
- Preparación del lavavajillas
- Colocación de los soportes de instalación
- Deslizamiento del lavavajillas en la abertura del gabinete
- Conexión de la línea de suministro de agua y energía eléctrica
- Conexión de la manguera de desagüe
- Nivelado del lavavajillas
- Sujeción del lavavajillas en la abertura del gabinete
- Verificación final de la instalación
- FUNCIONAMIENTO
- FUNCIONES INTELIGENTES
- MANTENIMIENTO
- SOLUCIÓN DE PROBLEMAS
- GARANTÍA LIMITADA
- CARACTÉRISTIQUES DU PRODUIT
- CONSIGNES DE SÉCURITÉ
- APERÇU DU PRODUIT
- INSTALLATION
- Pièces et outils requis pour lʼinstallation
- Aperçu de lʼinstallation
- Dimensions du produit
- Caractéristiques du produit
- Préparer lʼouverture de lʼarmoire
- Préparation des raccords des conduites d’eau et du branchement électrique
- Préparer le lave-vaisselle
- Fixation des supports d’installation
- Positionnement du lave-vaisselle dans l’ouverture de lʼarmoire
- Raccordement de lʼalimentation en eau et branchement électrique
- Raccordement du tuyau de vidange
- Mise de niveau du lave-vaisselle
- Fixation du lave-vaisselle à l’ouverture de lʼarmoire
- Dernière vérification de l’installation
- FONCTIONNEMENT
- FONCTIONS INTELLIGENTES
- ENTRETIEN
- DÉPANNAGE
- GARANTIE LIMITÉE
19INSTALLATION
ENGLISH
Connecting Water Supply
Line and Power
Connecting Water Supply Line
1
With the home water supply turned off, connect
the water supply line to the inlet valve on the left
front of the dishwasher.
CAUTION
• Tape or compound should not be used on
dishwasher inlet valve.
2
Tighten the compression nut.
3
Slide the water supply line back through the
channel, pulling gently from inside the cabinet
to make sure the line is not kinked, pinched,
stressed or crushed.
Connecting Power
The dishwasher should have a dedicated properly
grounded branch circuit to connect the 3 wire setup
which includes the ground wire.
If a 3-prong power supply is used, it should be in an
accessible location adjacent to the dishwasher within
4 ft. (1.22 m) of the dishwasher side and not behind
the dishwasher.
NOTE
• The best location for the electrical conduit is on the
right side of the back wall. Re-route the electrical
cable before installation if the electrical conduit pipe
is longer than 3” (76 mm) and is centered on the
back wall.
1
Turn off electrical power to the unit at the circuit
breaker.
2
Use a Phillips screwdriver to remove the screw
from the junction box cover and remove the
cover.
3
Use a Phillips screwdriver to remove 2 screws
.
4
Remove the junction box from the appliance.