Owner's Manual

Chapter 1 Before use
1-4
⑫ +, - buttons – It is used to setting values from menu.
⑬ USB – You can connect USB storage device. (Mouse should be connected rear side).
 Rear side
① Camera video input – These are used to connect cameras
② Main output port – It is used to connect BNC type monitor. (It outputs the same
video as MAIN output.)
③ VGA port – It is used to connect VGA monitor.
④ Audio input port – It is used to connect audio output port of external device.
⑤ Ethernet port – It is used to connect RJ-45 Ethernet connector. (LAN PORT).
⑥ Sensor/Alarm/RS-485 ports – These are used to connect sensor, alarm and RS-485
serial communication port
⑦ SPOT output port – It is used to connect BNC type monitor.
⑧ Audio output port – It is used to connect audio input port of external device.
⑨ Mouse port – It is used to connect USB mouse
⑩ Power connector – It is used to connect Power adapter.
Caution
Front side USB port does not support mouse.