Owner's Manual

Chapter 2 Functional description
2-26
2-4. PTZ Control
 It is used to control PTZ camera which is connected at RS-485 port. Settings of
camera and DVR should be done if you are to control PTZ camera.
1. Click the icon to control PTZ.
2. Control the PTZ camera using each item below.
① Click this button to close the PTZ control window.
② Click this spin control to select PTZ camera. (1~4)
③ Click this spin control to specify the moving speed of PTZ camera (1~6).
④ Click this button to show the OSD menu of camera.
※ Supported cameras : LG-Multix, LG-Multix_E, Pelco-D, Pelco-P
⑤ Click these direction buttons to pan or tilt camera.
⑥ Click to control zoom in or out.
⑦ Click to control the focus of camera manually.
⑧ Click to control the iris of camera manually.
⑨ Click to select preset number.
⑩ Click to move to selected preset position.
⑪ Click to set current position as a new preset position.
⑫ Click to delete specified preset number.
⑬ Click to start touring, which function traverse each preset position one by one
according to dwell time.