Owner's Manual

ManualsBrandsLG ManualsDigital Video Recorders (DVR)LE2104D-NH

16 Connections and settings

5. Attach the HDD onto the hard disk mounting brackets

with four screws.

6. Attach the hard disk mounting brackets with the

screws.

7. Connect the HDD power cable. You must use the sup-

plied SATA power cable. The SATA power cable that

used for normal PC is not compatible with this unit.

8. Connect the Serial SATA cable.

9. Connect the SATA cable to the SATA connector on the

main board.

When installing 1 HDD.

Connect the SATA cable of the HDD to the SATA

connector of the main board.

When installing 2 HDDs.

9-1.

Connect the SATA cable of the first HDD to the

first SATA connector of the main board.

9-2.

Connect the SATA cable of the second HDD to

the second SATA connector of the main board.

10.

Assemble the front panel and top case.

11. Fix the screws.

12. After installing the HDD, you must format the HDD

using the setup menu (See page 37).

•

Note:

When you add the new HDD, do not change the position

of the HDD. It may delete the current data and cause a mal-

function.

Replacing the Hard Disk Drive

Turn the power of the unit off and detach the power plug

from the outlet.

1. Follow steps 1-4 described in “Installing the Hard Disk

Drive”.

Remove the connector from the HDD.

3. Remove the screws from the hard disk drive on the bot-

tom of the hard disk mounting bracket.

4. Remove the HDD from the hard disk mounting bracket.

5. Install the new HDD in the reverse order to when

replacing the hard disk drive.

After replacing the hard disk drive, insert the power

plug into the outlet and turn the power of the unit on.

Notes:

Make sure that each of the SATA cables is connected to

the connector housing through its holes.

Do not stack them nor keep them upright.

Do not use an electric screwdriver to fix them.

The HDD should be formatted after installation

When installing or adding the HDD, it should be for-

matted before use. You can set the event or normal

partition space of the HDD. (See page 37). The HDD

which has been used in another device should be for-

matted to make sure normal storage.

•