Owner's Manual

34 Connections and settings
Mail
Notification
ON: Notifies the user of unit operating information
by e-mail according to notification settings.
OFF: The notification function is not used.
The mail options are not set.
SMTP Server: Enter the SMTP Server address using the
virtual keyboard.
If notification is set to ON and the SMTP server option
is empty, the SMTP Port, User Name, Password and TLS
options are not set.
SMTP Port: Enter the SMTP Port Number using the
virtual keyboard. Typically the port used for SMTP is
25. However in some cases it is better to change this
port number for added flexibility or security. If desired
change the port number (1 ~ 65535).
User Name: Enter the user name using the virtual key-
board.
Password: Enter the password using the virtual key-
board.
TLS: Set to ON when using the TLS (Transport Layer
Security) function. By default, TLS is OFF.
Mail Address (1-3): Enter the mail address using the vir-
tual keyboard.
You can input up to 3 e-mail addresses.
E-mail Test: Select [E-mail Test] to test send an e-mail.
Note:
The SMTP server, SMTP port no., user name or password
settings are optional. The DVR can send e-mail directly
without the use of an SMTP server or MTA (message trans-
fer agent). In certain cases all e-mail should be forwarded
to a specific SMTP server. Specify the server host name or IP
address in such a case. For more detail on SMTP setup, ask
your network administrator and/or mail service provider.
•
-
-
•
•
•
•
•
•
•
Emergency
Notification:
ON: Notifies the emergency agent about unit oper-
ating information according to your notification
settings.
OFF: Notification function is not used.
If you set to OFF, the Emergency ID, IP Address and
Port options are not set.
Emergency ID: Select the emergency ID of the emer-
gency agent program.
IP Address: Enter the IP address of the emergency agent
program using the virtual keyboard.
Port: Enter the port number of the emergency agent
program using the virtual keyboard. The factory default
port for this function is 9002. However in some cases it
is better to change this port number for added flexibil-
ity or security. If desired change the port number (1025
~ 65535). You can set up to 9 IP/port numbers.
•
-
-
•
•
•