Owner's Manual

54 Client program
Hard disk
Overwrite: Select the overwrite recording type (Off,
Normal Partition, Event Partition or All). This func-
tion is possible when the selected HDD type has fully
recorded.
F
ull Warning: When the HDD has overflowed the warn-
ing message is displayed.
Event Partition: Sets the space of event partitions for
event recording.
Log Out
Auto User Logout: Setting the logout time. You can set
the auto logout time to Off, 5 minutes, 10 minutes, 30
minutes or 60 minutes.
Buzzer settings
Select the buzzer options.
Button: Makes a sound when using the buttons.
Sensor: Makes a sound when an sensor occurs.
Motion: Makes a sound when motion is detected.
System: Makes a sound when a HDD has bed sector.
Update settings
Set the update options.
Item: Select the items for updating.
PTZ Protocol: Set to PTZ Protocol update.
System S/W: Set to System S/W update.
Method: Select the update method.
USB: Update from USB memory stick.
Network: Update from the update server.
Update Server: Enter the IP address of the update
server.
Note:
If you can not update from the update server, check the
TCP/IP options and the IP address of the update server.
User settings
Add the User
You can add the user.
1. Click
the "Add" button. User Setting window is dis-
played.
2.
Enter the User ID and Password.
3. Enter the password again to verify.
4. Select the user level and then click "OK" to confirm your
selection.
•
•
•
•
•
•
•
•
•
-
-
•
-
-
•
Edit the registered User
You can change the User ID, password or user level.
1. Choose
the user ID and then click the "Edit" button.
2. Change the ID, Password or User level then click "OK" to
confirm your selection.
Delete the registered User
1.
Choose the user ID you want to delete
2. Click the "Delete" button.