Owner's Manual

49
CLIENT
PROGRAM
Note:
In case of entering the server name instead of the
IP Address. You should set up the DDNS configura-
tion properly in the server. Please refer to the server
manual to set up the DDNS function.
How to find the IP Address
In case of using the Static IP Address
Check the IP Address in the TCP/IP option of the
DVR setup menu.
In case of using the Dynamic IP Address
1. Press
INFO to display the System Information
window.
2. Check the "Network IP" options value.
Note:
If you use Dynamic IP Address, you should set the
DHCP option to ON.
In case of using the DDNS function
Check the registered Host Name of the DDNS setup
menu (See page 33-34).
In case that the DVR is connected to the network
through the Broadband Router
You must set the port forwarding according to the
settings of the broadband router. Refer to the manual
of Broadband router for more detailed settings.
Note:
If you use the multi DVR with Broadband router, you
must set the TCP/IP port number for each DVR.
User Log-In
1. Select the registered site name and right click the
mouse.
2.
Select [User Log-In].
3. Enter the user ID and enter the password.
- ADMINISTRATOR: To operate the unit without
limitations.
-
Power User: To use the live and search mode
functions.
-
Normal User: Show the live image only.
4. Select [OK] and the [Network Client] main window
is displayed.
Notes:
•
If someone logged in the DVR using the Admin
ID, you can not log-in using the Admin ID.
•
If you want to log-out, right click the mouse on the
site name and select [User Log-Out].
•
Up to 5 users can connect to the DVR system
using the client program as shown below.
User User 1 User2 User3 User4 User5
Case 1 Admin Power Normal Normal Normal
Case 2 Power Power Normal Normal Normal
Case 3 Normal Normal Normal Normal Normal
Case 4 Admin Normal Normal Normal Normal
Case 5 Power Normal Normal Normal Normal