Owner's Manual
Preparation
11
2
Preparation
Rear Panel
Rear of the LE5016/LE4016 series
a b c
d e f g h i jklm no p q
Rear of the LE5008/LE4008 series
a
b nkp c
d e f g h i j lm o q
a
VIDEO INPUT: Connect the camera’s video output to these BNC connectors.
b
LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector.
c
Power Cord Inlet (AC IN): Connect the power plug.
d
RS-485 Terminals: Connect RS-485 compatible cameras.
e
RELAY-OUT Terminals: Output terminals for alarm (relay) signal.
f
CONSOLE: Used to connect to a host device equipped with RS-232C connector (such as a personal computer).
g
SPOT-OUT (BNC Type Connector): Connect to spot monitor or display device.
h
MAIN-OUT (BNC Type Connector): Connect to main monitor or display device.
i
ATM/POS: Used to connect to a ATM/POS device.
j
VGA: Connect a VGA monitor.
k
AUDIO OUT 1: Connect to an active speaker with a built-in amplier.
l
LAN Port: Connect the ethernet 10/100/1000 Mbps network cable for controlling this unit via a PC network.
m
USB Ports: Connect an optional extension USB device.
n
AUDIO INPUT: Connect the audio output of an external device.
o
ALARM-IN Terminals: Input terminals for alarm (relay) signal.
p
AUDIO OUT 2: Connect to an active speaker with a built-in amplier. Two-way audio output.
q
E-SATA: Connect the external SATA device.